Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Kensington Homeowners
Water is the quiet enemy of every chimney in Kensington. It gets in at the top, where the cap sits and the crown slopes, and it works its way down through freeze-thaw winters that crack masonry and rust dampers shut. A missing or rusted-through cap lets rain pour straight into the flue, and a hairline crack in the crown gives it a place to settle and expand. Our technicians have up to 9 years of experience sealing both of those entry points with professional-grade materials, and we handle everything from chimney sweep work to full crown rebuilds. Call (855) 974-3360 to book a free estimate. We answer 24/7.
What Our Chimney Cap & Crown Service Includes
A cap and a crown are two different parts doing two different jobs. The cap is the metal or mesh lid that keeps rain, animals, and debris out of the flue. The crown is the concrete or masonry slab at the very top of the chimney that sheds water away from the brick. Both fail over time in Kensington’s weather, and both are cheap to fix compared to the structural damage they prevent. Here’s how we handle each piece of the work.
Cap Installation
A cap installation means fitting a new lid over the flue opening, sized to the exact dimensions of your chimney and secured so wind can’t shift it. You need one if your chimney has no cap at all, which is common on older homes where the original cap rusted away and was never replaced. We measure the flue, match the cap to the flue type (single-flue or multi-flue, wood or gas), and fasten it down with the right anchors so it stays put through a Kensington winter.

Cap Replacement
Cap replacement covers the case where a cap is still up there but no longer doing its job: rusted through, dented, missing screens, or rattling loose after storm damage. A failing cap is worse than no cap in one way, because homeowners assume they’re protected when they aren’t. We pull the old cap, check the flue top and crown for water damage it may have let in, and install a new cap in professional-grade stainless or the appropriate material for your setup.

Crown Repair
Crown repair addresses cracks, spalling, and crumbling in the concrete or masonry slab at the top of the chimney. When the crown cracks, water gets into the masonry below and starts the freeze-thaw cycle that splits brick and mortar apart. We assess whether the crown can be repaired or needs rebuilding, then patch or recast it with a proper slope so water runs off instead of pooling.

Crown Coating
Crown coating is a protective sealant applied over a sound crown to extend its life and keep small cracks from turning into big ones. It’s the right call when the crown is still structurally intact but showing surface wear or hairline cracks. We use a flexible, breathable coating that moves with the masonry instead of trapping moisture inside it, which is what a paint-style sealant would do.
Multi-Flue Cap
A multi-flue cap covers a chimney with more than one flue opening under a single lid, which is standard on larger Kensington homes with multiple fireplaces or a furnace flue alongside the main chimney. These caps need to be sized and vented correctly so each flue still draws properly. We build multi-flue caps to fit the whole chimney top and anchor them so they don’t become a wind hazard.
Custom Cap
Custom caps are for chimneys that don’t take a standard size: oversize flues, unusual shapes, or a top that’s been rebuilt and no longer matches an off-the-shelf cap. We fabricate to your chimney’s actual measurements in the material that suits your setup. This is where a real measurement and a proper fit matter, because a loose cap lets water and animals in just as easily as a missing one.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We specify professional-grade materials because your chimney vents fire, and the cap and crown are the parts most exposed to weather. We work with Famco caps and components, which hold up well on residential flues and are straightforward to fit and service. We also work with Copperfield products where the job calls for them, matching the material to the chimney’s size and exposure rather than forcing one brand onto every roof.
We service and install DuraFlex and HeatShield systems as part of our liner and rebuild work, and a cap or crown job often reveals a liner issue underneath. Whether you have a Famco cap, a Copperfield product, or any other make, we can help. If your existing cap is still serviceable, we’ll say so and repair it rather than sell you a replacement. That’s the difference between a full chimney specialist and a sweep-only service.
Signs You Need Chimney Cap & Crown Right Now
- Water in the firebox after rain. If you find dampness, rust stains, or a musty smell in the firebox after a storm, the cap or crown is the first place we look. Water entering at the top is the leading cause of chimney deterioration, and it’s the easiest thing to stop.
- Cracked or crumbling crown. A visible crack across the crown, or chunks of concrete flaking off the top, means water is already getting into the masonry. Small cracks spread with each freeze, and the repair gets bigger the longer you wait.
- Rusted, dented, or missing cap. A cap that’s rusted through or blown loose isn’t protecting anything. If you can see daylight through the mesh or the cap is sitting crooked, it needs replacement before the next heavy rain.
- Animals or debris in the flue. Birds, squirrels, and leaves find an uncapped or poorly screened flue fast. A proper cap with intact screening keeps them out, and animals nesting in a flue are both a fire risk and a blockage.
- Efflorescence or white staining on the brick. White powdery stains near the top of the chimney point to moisture moving through the masonry. That’s a crown problem showing itself on the outside, and it’s worth a look before the brick starts spalling.
Our Chimney Cap & Crown Process – Step by Step
- 1
Roof-level inspection. We get up on the roof and look at the cap, crown, flue top, and flashing as a set, because a crown problem often shows up as a flashing problem and vice versa. We take photos of what we find so you can see the condition for yourself.
- 2
Written assessment and estimate. We tell you what’s actually wrong, what can safely wait, and what needs attention now, then give you a written estimate with the price set per job. If the cap just needs a repair instead of a replacement, we’ll say that.
- 3
Material selection. We match the cap and crown materials to your chimney’s size, flue type, and exposure, drawing from professional-grade brands like Famco and Copperfield. The right material for your chimney’s condition matters more than a brand name on a box.
- 4
The work itself. Cap installation or replacement, crown repair or coating, and multi-flue or custom fabrication are handled by the same crew that inspected the chimney. One crew, every layer of your chimney system, so there’s no handoff and no gap in accountability.
- 5
Final check and photo report. We check that the cap is secured and the crown sheds water properly, then walk you through photos of the finished work. If a liner or rebuild issue turned up during the job, we document it and explain your options without pressure.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Kensington?
A typical cap installation in Kensington runs $150 – $350 depending on flue size and cap material, and a crown repair usually lands in the $250 – $600 range, with a full crown rebuild at the higher end and more if the chimney top is badly deteriorated. Multi-flue and custom caps run higher because they’re fabricated to the chimney’s measurements, typically $300 – $700. These are estimated ranges; the written estimate sets the final price.
What moves the price is the size of the chimney top, the material you choose, whether the crown can be repaired or has to be rebuilt, and how much water damage got in before anyone caught it. You avoid overpaying by getting a written estimate before any work starts and by asking whether a repair is possible instead of a full replacement. Our free estimate includes the roof inspection, photos, and a flat-price written estimate, and we’ll tell you plainly when work can safely wait. A cap and crown done right now cost far less than the masonry and liner work a leaking top eventually causes.
Chimney Cap & Crown Near Kensington – Our Service Area
We serve Kensington and the surrounding communities, including chimney cap & crown work in Southwest Philadelphia and East Lansdowne, plus Lower Merion, Eastwick, Upper Darby, Yeadon, Darby, Lansdowne, Ardmore, Port Richmond, and Fishtown. Dispatch runs from 7am to 7pm, Sunday through Friday, and most Kensington-area jobs are booked into the next available opening. Roof access and chimney height are the main factors in how quickly a cap and crown job gets scheduled.
Serving Kensington, PA – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Kensington
A chimney cap is the cover over the flue opening that keeps rain, animals, and debris out, and the crown is the sloped masonry or concrete slab at the top of the chimney that sheds water away from the brick. They’re separate parts doing separate jobs, but both protect the chimney from water. Together they’re the first line of defense against the deterioration that causes most chimney repairs.
Most cap installations and crown repairs are finished in a single visit, typically a few hours depending on the chimney. A full crown rebuild or a custom or multi-flue cap takes longer because there’s demolition, forming, and curing involved. We’ll tell you the expected duration in your written estimate so you know what to plan for.
Cap installation typically runs $150 – $350, crown repair $250 – $600, and multi-flue or custom caps $300 – $700, as estimated ranges. The written estimate sets the final price, and the free estimate includes the roof inspection and photos. Call (855) 974-3360 for an exact quote – estimates are free.
Yes, we service Famco and Copperfield caps and components and work with DuraFlex and HeatShield systems for liner and rebuild work. A cap and crown job often turns up a liner issue underneath, and we can assess it in the same visit. Whether you have one of those brands or another make, we can help.
Same-day service is sometimes possible depending on the job and the day, but it isn’t guaranteed. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday, and a call outside dispatch hours is booked into the next opening. We’re closed Saturday, so a call then gets booked for the next Sunday-through-Friday opening.
We stand behind the work we do, and your written estimate will outline what’s covered. The specific terms depend on the materials and the job, so we put them in writing before any work starts. If something isn’t right with the installation, call us and we’ll make it right.
Clear access to the fireplace and the area around the chimney if the technician needs to come inside, and let us know about any pets or gate codes. Most of the work happens on the roof, so you don’t need to do much beyond making sure we can get to the chimney. If you’ve noticed water in the firebox or a specific smell, mention it when you book so we can look for it.
Schedule Your Chimney Cap & Crown Service in Kensington Today
Don’t wait for the next storm to find out your cap or crown has failed. Call (855) 974-3360 for a free, no-obligation estimate on chimney cap & crown work in Kensington, backed by the same crew that handles your chimney repair and chimney liner & rebuild needs. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Kensington.