Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Kensington
If you own a rowhouse in Kensington, your chimney is almost certainly not the freestanding kind you see in photographs. It’s one stack in a continuous run of brick, tied to your neighbor’s flues and hidden behind a facade that’s been patched, re-pointed or re-faced over the years. We work on these chimneys constantly, and we know how much the job changes when access means setting a ladder against adjoining rooftops on a tight block rather than walking up to a detached house. Whether you need a routine sweep before the autumn season or a Level 2 inspection on a converted coal flue, our technicians have up to 9 years of experience and handle the whole system from the cap to the firebox floor. Call (855) 974-3360. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Kensington Homeowners Call Chimney Sweep Kensington for Chimney Sweep
Kensington chimneys are rarely simple. On block after block, the original coal flue was converted decades ago to vent a gas furnace or water heater, and the liner was never brought up to date with that change. A regular sweep who only brushes what’s directly above the fireplace will miss the shared stack entirely. That’s why we run a camera through the flue and map the whole run before we recommend a thing.
We also understand the roof-access reality of this neighborhood. Most work here happens from the rooftops of attached rowhouses, with ladders placed across adjoining buildings and flashing that has to be treated carefully so the chimney crown and the masonry below stay watertight. Getting that wrong on a Kensington block creates a leak you’ll be chasing for years.
Our technicians handle sweeping, Level 2 inspections, creosote removal, liner installation with HeatShield and DuraFlex systems, caps, crowns and fireplace repair. That means one company from the first camera pass to the finished liner, rather than a sweep who hands off structural work to someone else. That’s a real difference when your chimney shares a wall with your neighbor’s.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Kensington
Every chimney in Kensington has its own history, and our services are built to match what your flue actually needs, not a preset package. Here’s how each one works in this neighborhood’s rowhouses.
Level 1 Inspection
A Level 1 inspection is the routine visual check you’d get alongside an annual sweep. In a Kensington rowhouse, it covers the firebox, damper, smoke chamber and the reachable parts of the flue, plus the chimney cap and crown from the roof. It’s the right starting point for a chimney that’s been in steady use and hasn’t changed configuration.

Level 2 Inspection
A Level 2 inspection adds a camera run through the entire flue, and in Kensington that’s often the point. Shared, continuous stacks with a converted coal flue need to be checked for missing liner sections, offset joints and cross-contamination from a neighboring appliance. We send you the photo documentation so you can see what the camera saw before anything is recommended.

Creosote Removal
Creosote builds up differently depending on how and how much you burn, and the glaze stage is the one that matters most for fire risk. Our sweep and removal work clears the buildup and tells you plainly what condition the flue was in when we finished. If third-degree glazed creosote is present, sweeping alone won’t solve it, and we’ll explain the options.

Soot Removal
Soot and ash collect in the smoke chamber and firebox area, especially in chimneys that had a coal history before conversion. Our fireplace cleaning and soot removal handles the firebox, damper and surround so the whole hearth area is clean and draft problems are easier to spot. It pairs naturally with a routine sweep.
If you want the full picture of what we handle, our chimney sweep service covers everything from these inspections to liner installation and full rebuilds.
Trusted Brands We Service in Kensington
When a liner or a firebox resurfacing is the right call, the material matters. We work with professional-grade brands including HeatShield and DuraFlex, along with Famco and Copperfield, because your chimney vents fire and the products inside it are not where you cut corners. HeatShield resurfacing can restore a firebox or flue that doesn’t need full replacement, while DuraFlex liners suit a stack that’s failed outright. We specify the material to match your chimney’s actual condition rather than applying one solution to every flue. If your Kensington rowhouse needs a liner, we’ll tell you which option fits and why, with the photo evidence in hand.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Kensington Homes
- Shared flues with failed or missing liners. A neighbor’s appliance can vent into the same continuous stack yours does, so a failed liner in one unit lets combustion gases cross-contaminate both. One house’s draft problem often shows up next door first.
- Tricky roof access on attached blocks. Ladder placement across adjoining rooftops is the norm here, and an unsecured setup or unprotected flashing leads to leaks at the crown. The roofline, not the street, sets the schedule on these jobs.
- Freeze-thaw damage to exposed brick and crowns. Philadelphia’s cold winters and humid summers spall exposed brick and crack crowns on rowhouse chimneys, letting water reach flues that were never updated after coal conversion.
- Coal-era flues that were never lined. Many Kensington chimneys still carry an unlined flue from their coal days, now handling gas or oil exhaust it was never built for. That’s a code and safety gap, not a cosmetic one.
Pricing for Chimney Sweep in Kensington, PA
Pricing here follows the work, and the written estimate sets the final price. A typical annual sweep and Level 1 inspection in Kensington runs $150 – $280, and a Level 2 inspection with a camera pass on a shared or converted flue runs $200 – $400. Creosote removal, especially when glazed buildup is present, typically runs $250 – $600 depending on the flue’s condition. Caps and crowns usually land between $300 and $700, and liner work with HeatShield or DuraFlex is quoted separately once we’ve seen the actual flue. What moves a Kensington estimate most is roof access on a tight attached block and whether the stack is shared. Every estimate is free, and we don’t recommend liner or structural work without camera evidence you can review yourself.
We Also Serve Cities Near Kensington
Our chimney work reaches the neighborhoods and towns around Kensington, including Port Richmond, Fishtown, Frankford and Hunting Park. If you’re just outside the neighborhood and dealing with the same attached rowhouse chimneys and tight roof access, we can help. Serving Kensington and its neighbors, we bring the same whole-system approach to every block. Call (855) 974-3360 for a free estimate in any of these areas.
Serving Kensington, PA – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Kensington
Backup usually means the problem is inside a shared or continuous flue, not at the cap or crown you can see from the street. On a typical Kensington rowhouse block, the original coal flue now vents a gas furnace or water heater, and a neighboring appliance ties into the same continuous stack. If that shared flue is blocked or the liner has failed, smoke or fumes back up into one unit. A camera pass through the whole run is the only reliable way to find it. Call (855) 974-3360 for an exact quote on a Level 2 inspection; estimates are free.
Yes, and on many Kensington blocks that’s simply how the work gets done. The chimneys sit so close together that a technician can inspect or brush a neighboring flue from the same rooftop setup. That access is also why we check flashing and the crown carefully on the adjoining buildings, so the job doesn’t leave a leak behind. Call (855) 974-3360 to book an inspection; estimates are free.
An unlined coal-era flue handling gas or oil exhaust is a real safety and code gap, and it’s one of the most common findings in Kensington. Older residents often know which houses still have abandoned coal chutes and flues that were never updated, and the camera confirms it. Where the clay is sound, HeatShield resurfacing can restore the flue; a failed stack usually needs a DuraFlex liner. We won’t recommend either without photo evidence you can see. Call (855) 974-3360 for a free estimate.
Yes. Even a lightly used chimney collects creosote and soot, and a flue that vents a furnace still needs the shared stack checked for liner failure and cross-contamination. In Kensington’s rowhouses, an annual sweep plus inspection is how you catch a neighbor’s flue problem before it reaches yours. Call (855) 974-3360; estimates are free.
You can’t tell from the firebox, which is why we camera the flue. First-degree creosote is a light soot you can brush away; third-degree is glazed and hard, and brushing won’t remove it. The difference decides whether a standard sweep is enough or the flue needs a larger plan. Call (855) 974-3360 and we’ll tell you honestly what we find; estimates are free.
Whether you’re on a dense rowhouse block with a shared stack or a converted coal flue you’ve never had properly inspected, the right place to start is a camera pass and an honest read of what it shows. Call (855) 974-3360 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Nothing gets recommended here without evidence you can see for yourself, and we’ll say plainly when work can safely wait.
Written by the team at Chimney Sweep Kensington.