Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Liner & Rebuild Across Frankford
Chimney liner and rebuild work in Frankford asks more of a crew than the same job in a detached suburban house, and that’s exactly why we’ve built this page the way we have. Frankford’s two- and three-story brick rowhouses, most built between 1900 and 1930, share chimney stacks in ways that change how a liner gets installed and how a rebuild is sequenced. We answer 24/7 at (855) 974-3360 and dispatch to Frankford from 7am to 7pm, Sunday through Friday. Estimates are free, and our technicians have up to 9 years of experience working on attached masonry stacks.
Why Frankford Homeowners Call Chimney Sweep Kensington for Chimney Liner & Rebuild
Frankford is a rowhouse town, and the chimney work here reflects that. When we’re called to a block in Frankford, the first thing we do is figure out who shares your stack. That sounds like it should be obvious. It isn’t, especially in the tighter stretches near Frankford Avenue where sidewalls meet and the chimney tops sit shoulder to shoulder above the parapet.
We work exclusively with the professional-grade materials chimney pros specify nationwide. DuraFlex, Olympia Chimney, HeatShield, Gelco, Famco and Copperfield are the brands on our roster, and having both HeatShield resurfacing and DuraFlex relining options means we’re not pushing one answer onto every chimney we look at. Structural rebuilds, crown and cap work, fireplace repairs inside the firebox: it’s all handled by the same team, top of the cap to the firebox floor. We serve homeowners throughout Frankford and the surrounding blocks, and our full-system capability is the reason a shared-stack problem here doesn’t turn into a handoff between three contractors.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Liner & Rebuild Services in Frankford
Stainless Steel Liner
A stainless steel liner is the standard fix when Frankford’s original clay tile has failed or when a flue was never lined properly to begin with. In attached rowhouses, the liner needs isolation so exhaust stays in your flue and out of your neighbor’s. We size the liner to the appliance that actually vents through it, then seal it at the top and the smoke chamber, because an uninsulated liner shoved into a tight chase is a draft problem waiting to happen.
Flexible Liner
Flexible liners bend through the offsets and jogs that early-1900s Frankford chimneys almost always have. Rigid pipe won’t make those turns, and cutting the chimney open to force it is the wrong call on a party wall. DuraFlex is the flexible system we reach for when the flue’s path is irregular but the surrounding masonry still has enough integrity to hold a liner.
Liner Replacement
Replacement work in Frankford usually starts with a Level 2 inspection, because the visible tile at the top of the stack tells you very little about what’s happening 20 feet down. Spalling clay tile and deteriorated parging from Philadelphia’s freeze-thaw winters create gaps that let creosote and moisture reach the surrounding brick. Once that’s happening, patching the tile in place is a stopgap, and the honest fix is a full reline with the flue properly sized for the load.
Partial Rebuild
Sometimes the liner is fine and the problem is the chimney’s skin. Spalled brick courses, a failed crown, missing flashing at the roof line: those get rebuilt section by section rather than torn down. On Frankford’s tight blocks, a partial rebuild also lets us address roof access and shared-stack sealing in one visit instead of two. Wet chimney tops here are the leading cause of masonry deterioration, so we look at the crown and cap as part of the same repair, not an add-on.
Trusted Brands We Service in Frankford
We install and service DuraFlex, Olympia Chimney, HeatShield, Gelco, Famco and Copperfield systems. Those names matter because they’re the ones specified by certified chimney professionals, and the material has to match your chimney’s actual condition. HeatShield works where resurfacing the flue is enough. DuraFlex handles a full reline through a difficult path. Olympia covers the stainless options when the flue needs something heavier. We don’t stock parts on a truck and we don’t claim to. What we do is specify the right product for your stack, order it, and install it with proper isolation. If you want to talk through which brand fits, call (855) 974-3360.
Common Chimney Liner & Rebuild Problems We See in Frankford Homes
These are the failures that come up again and again on Frankford’s attached rowhouse blocks. They’re clustered here because most of them trace back to the same cause: shared masonry that has aged unevenly.
- A shared stack with an unsealed adjacent flue. A neighbor’s furnace or water heater vents into the same chimney, and without a dedicated liner their exhaust seeps through cracked parging into your rooms. This is the cross-contamination risk that makes relining one flue without confirming the others sealed a mistake.
- Spalling clay tile and deteriorated parging from freeze-thaw cycles. Philadelphia’s winters push water into the masonry, then it freezes and expands. That opens gaps that let creosote and moisture reach the brick and accelerate liner failure.
- Improperly sized or uninsulated liner replacement in a tight rowhouse chase. A liner crammed into the chase without isolation creates poor draft, and poor draft means first- and second-degree creosote builds up faster than it should.
- Debris and nests carried in from neighboring flues. In Frankford’s tight rowhouse blocks, chimney tops are often shared or closely spaced, so technicians frequently find nests and debris from adjacent flues. Access itself takes care on these roofs, and narrow alleys mean the setup is never routine.
See the difference
Before
After
Before
After
Before
AfterHow Frankford’s Shared Rowhouse Flues Change the Job
Here’s the sentence that should sit at the front of any conversation about chimney work in Frankford: in attached rowhouses, a single chimney stack often serves flues from two or three adjacent homes. Relining your flue without confirming the others are sealed can let smoke and carbon monoxide migrate laterally through shared masonry. That’s not a theoretical risk. It’s a real consequence of building practices from a century ago, when the stack was designed to serve the whole row.
On many Frankford blocks, a homeowner calls after noticing a strong draft or smoke odor in an upstairs room. A Level 2 inspection often reveals that the clay tile liner has cracked or spalled, and that a neighboring appliance vents into the same stack. A qualified local pro typically confirms the shared flue arrangement first. Then it’s either a stainless liner (DuraFlex or Olympia, with proper isolation) or a rebuild of the damaged section, sealing the smoke chamber and crown so exhaust can’t cross back through the masonry. The order matters, and skipping the inspection step to save a visit is how these jobs go wrong.
Lining and rebuilding a Frankford rowhouse isn’t the same job as doing it in a detached suburban house. A suburban homeowner getting a reline is dealing with a single flue in a private stack, on a roof with open ground on four sides. Our work sits on a rowhouse block where the stack is shared, the roof access is tight, and the exhaust from a neighbor’s appliance is a factor in whether your liner seals properly. Getting the sizing, isolation and crown sealing right the first time is why homeowners here call us instead of a general handyman. Our chimney liner & rebuild team has walked through this exact scenario on many Frankford blocks.
Pricing for Chimney Liner & Rebuild in Frankford, PA
Pricing here comes down to three things: what the inspection finds, how complex the shared stack arrangement is, and whether we’re relining or rebuilding. A typical stainless steel liner for a single flue in Frankford runs $2,800 to $5,400 depending on length, diameter and offset. A flexible liner for an irregular path generally lands in the same range. A partial rebuild of spalled brick and a failing crown runs $3,200 to $7,500, and a full reline with a partial rebuild together often sits between $5,500 and $9,000. Those are estimates, and the written estimate after inspection sets the final price. Nothing gets recommended without camera evidence you can see for yourself. Call (855) 974-3360 for a free estimate.
We Also Serve Cities Near Frankford
If you’re just outside Frankford, we cover the surrounding neighborhoods too. Same shared-stack considerations apply to Olney and Hunting Park, and the rowhouse stock in Port Richmond and Kensington raises the same questions about adjacent flues and roof access. If your chimney top is close to a neighbor’s in any of those areas, the inspection is worth doing before any liner decision.
Serving Frankford, PA – Our Local Coverage Area
We serve Frankford and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Liner & Rebuild in Frankford
You can’t tell from the firebox or from the roof alone, so a Level 2 inspection with a camera is the way to confirm it. We check the full run of the flue for cracked or spalled tile, gaps in the parging, and any sign that a neighboring appliance vents into the same stack. If the tile has failed anywhere along the run, the liner is compromised and needs isolation or replacement. Call (855) 974-3360 to schedule an inspection and see the camera footage yourself.
A rebuild becomes the right call when the masonry itself has failed, not just the flue inside it. Spalled brick faces, crumbling mortar joints, a cracked or missing crown, or sections of the stack that move when pressure is applied all point to structural work. If the brick is sound and only the liner has failed, a reline handles it. The inspection settles which one you’re dealing with. Call (855) 974-3360 for an estimate that tells you honestly which side of that line your chimney falls on.
It creates a sealed, dedicated exhaust path so smoke and carbon monoxide stay in your flue and out of the shared masonry around it. In a Frankford rowhouse where the stack serves more than one home, that isolation is the whole point. It also gives creosote a smooth, properly sized surface to vent against instead of rough, cracked tile that traps buildup. Call (855) 974-3360 to talk through which liner fits your flue.
Yes. We install and service DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield throughout Frankford and the surrounding blocks. HeatShield is the resurfacing route when the existing flue can be restored in place. DuraFlex handles full relines through difficult paths, and Olympia covers the stainless systems when the flue needs something heavier. We match the brand to the chimney’s actual condition. Call (855) 974-3360.
First-degree creosote is a light, flaky soot that a sweep removes easily, while third-degree creosote is a hardened, glazed coating that has bonded to the flue surface and won’t brush off. The middle stage is the crusty, medium buildup most often found in a chimney that’s gone a few seasons without cleaning. The glazed kind is the serious one: it’s the fuel load most associated with chimney fires, and it often means the liner itself has failed and needs replacement. Call (855) 974-3360 for an inspection that identifies what’s actually in your flue.
If you’re in Frankford and you’re not sure whether you need a liner, a rebuild, or nothing at all yet, that’s the right place to start. Call (855) 974-3360 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll put a camera down the flue, show you what’s there, and tell you plainly when work can safely wait.
Written by the team at Chimney Sweep Kensington.