Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Liner & Rebuild Across Ardmore
If you own one of Ardmore’s older brick or stucco twins and you’re wondering whether your chimney needs a liner, a rebuild, or nothing at all, the honest answer starts with a camera run. Most of the chimney work in Ardmore runs on flues that were built for coal, retrofitted to oil or gas, and now vent appliances they were never sized for. That’s a liner conversation, but only when the inspection footage says so. We connect you with local chimney professionals who have up to 9 years of experience and know this housing stock. Call (855) 974-3360 and we’ll book a sweep and inspection. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Ardmore Homeowners Call Chimney Sweep Kensington for Chimney Liner & Rebuild
Ardmore is a walkable Main Line borough with a housing stock that punishes shortcuts. The colonials, Tudors and twins around downtown were built mostly between 1900 and 1940, many with exterior masonry chimneys, original clay-tile flues and slate roofs. That means the calls here are rarely sweep-and-go. They’re deteriorated crowns, spalled flue tiles and flues that have already been relined once or twice.
That’s the work we’re set up for. Our chimney liner & rebuild team handles the whole system, from the cap and crown down to the firebox floor and the damper inside the home. We work with professional-grade materials the trade actually specifies: DuraFlex, HeatShield, Olympia Chimney, Gelco, Famco and Copperfield. And we scope Ardmore jobs with the camera first, so you see the evidence before anyone quotes a liner.
If you’ve been told you need thousands of dollars of masonry or relining you can’t verify, that’s the exact situation we built our process around. Nothing gets recommended without footage and a photo report you can look at yourself. Response across Ardmore and the surrounding blocks is quick, because the housing types repeat. One twin looks a lot like the next.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Liner & Rebuild Services in Ardmore
The three services that come up most often in Ardmore are liner replacement, partial rebuild and stainless steel liner installation. Full rebuilds happen too, but usually after decades of water getting in behind failed masonry. Here’s how each one looks on Ardmore housing.
Liner Replacement in Ardmore
Most liner replacement calls in Ardmore start with a clay-tile flue that’s spalled or soft at the joints. When the original tile lining has failed and can’t be resurfaced, we size a new liner to the appliance actually venting into it, not to whatever the flue happened to be. A furnace and a wood fireplace have very different requirements, and the flue has to match.
Stainless Steel Liner Installation in Ardmore
A properly sized stainless liner is the standard fix when the existing clay flue is too deteriorated to save or the venting is wrong for the appliance. We work with DuraFlex and Olympia Chimney systems because they’re what chimney professionals specify when the liner has to last. On Ardmore’s steep rooflines and slate, the install is as much about safe access and a sound top termination as the liner itself.
Flexible Liner in Ardmore
Flexible liners earn their place in Ardmore’s older masonry because the flues aren’t straight. Coal-era flues often have offsets and bends that a rigid liner can’t follow without major demolition. A flexible liner follows the existing path, which keeps the job smaller and the disruption to a 1920s interior lower.
Partial Rebuild in Ardmore
Partial rebuilds address the exterior layer here: a cracked crown, failed mortar joints, pulled flashing. Southeastern Pennsylvania’s freeze-thaw winters open cracks that let meltwater into the flue, and the humid shoulder seasons speed up spalling behind the liner. A partial rebuild usually stops the water before it becomes a structural job. We handle crown, cap and flashing work at the same time so the fix is complete.
Trusted Brands We Service in Ardmore
We install and service the liner and repair systems the trade trusts in older masonry: DuraFlex, HeatShield, Olympia Chimney, Gelco, Famco and Copperfield. We don’t stock parts, so the right system is specified after the inspection, not pulled off a shelf. Turnaround on a standard reline is typically quick once the scope is set, and the materials are professional-grade because your chimney vents fire.
Common Chimney Liner & Rebuild Problems We See in Ardmore Homes
- Spalling clay tiles in coal-era flues. These flues were built for coal, later retrofitted to oil and gas, and decades of flue-gas moisture left the tiles shedding shards that collect on the smoke chamber shelf and obstruct draft. That’s a flue condition, not a sweeping problem, and it needs a camera to confirm.
- Cracked crowns and mortar joints from freeze-thaw. Southeastern Pennsylvania’s freeze-thaw winters crack crowns and joints, and meltwater works its way into the flue. The result is accelerated spalling behind the liner and a chimney that keeps failing no matter how often it’s patched.
- Party-wall stacks on downtown twins. On the twin and semi-detached homes around downtown Ardmore, adjacent chimneys share a party-wall stack. A failed crown or pulled flashing on one side often shows up as damp masonry and a ceiling stain on the adjoining side, so liner and rebuild scoping here sometimes has to account for two households on one masonry structure.
- Appliances vented into flues never designed for them. A gas furnace or water heater tied into a coal-sized flue is common in Ardmore, and it changes the liner work. The flue has to be sized to the appliance, not the other way around.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Liner & Rebuild in Ardmore, PA
Typical ranges in the Ardmore market: a standard stainless steel liner runs roughly $2,200 – $4,800 depending on flue height, appliance type and liner diameter. A HeatShield resurfacing often lands around $1,400 – $2,600 when the tiles can be saved. A partial crown and mortar rebuild usually runs $600 – $1,800, and a full chimney rebuild sits well above that, often $7,000 – $15,000 on a tall brick stack. Flexible liners and liner repairs fall within those bands. These are estimates, and the written estimate sets the final price. The estimate is free, and nothing is recommended without camera evidence you can see. Call (855) 974-3360 for an exact quote.
We Also Serve Cities Near Ardmore
We work the same housing types across the neighboring towns. If you’re on the edge of the borough, we also serve Lower Merion, Upper Darby, East Lansdowne and Lansdowne. The party-wall stacks and coal-era flues carry across the line, so the scoping approach doesn’t change much from one town to the next.
Serving Ardmore, PA – Our Local Coverage Area
We serve Ardmore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Liner & Rebuild in Ardmore
It depends on what the camera shows in the flue itself, not on the year the house was built. If the clay tiles are intact with sound joints, a HeatShield resurfacing can often restore the flue without a full reline. If the tiles are spalled or the joints are soft, a stainless liner sized to the appliance is usually the better fix. We won’t recommend either until you’ve seen the footage. Call (855) 974-3360 for an exact quote.
It can be either, and on a twin where the chimneys share a party-wall stack it’s often both sides of the same fault. A failed crown or pulled flashing on one side lets water travel through the shared masonry and show up on the adjoining ceiling. The only reliable way to know is to inspect both sides of the stack. Call (855) 974-3360 and we’ll scope it with photos.
You know because you see the evidence before the recommendation, not after. We run a camera through the flue, give you the footage and a photo report, and explain what’s failing and what can safely wait. If the flue doesn’t need a liner yet, we tell you that. Call (855) 974-3360 for a free estimate.
Yes. Two appliances venting into one flue changes the sizing, and a flue originally built for coal is usually the wrong shape and size for gas appliances. The liner has to be right for what’s actually venting, not what was venting when the house was built. The camera run shows how the flue is performing before the size is set. Call (855) 974-3360 for an exact quote.
Yes, especially if you’ve been told you need liner or rebuild work. Appliances venting year-round still deposit moisture and byproducts that damage an aging flue, and freeze-thaw damage happens whether or not you’ve had a fire. An inspection shows the condition and lets you decide with real information. An estimate is free. Call (855) 974-3360.
What Happens When You Call
You call, we book a sweep and inspection for your Ardmore home, and the technician runs a camera through the flue and shows you what’s there. You get a photo report and a written estimate before anything is agreed. If the flue can wait, we say so. If it needs a liner or a rebuild, you’ll see the footage behind that recommendation. Call (855) 974-3360. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Kensington.