Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Hunting Park
If you live in Hunting Park, your chimney is probably doing more work than the house was built for. A cap or crown here has to fit a stack that may serve two homes, not one. We know these rowhouse blocks, and we know what it takes to seal a chimney breast that a neighbor shares with you. Call (855) 974-3360 to book a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Why Hunting Park Homeowners Call Chimney Sweep Kensington for Chimney Cap & Crown
Our technicians have up to 9 years of experience, and on attached rowhouse blocks that experience looks different than it does in the suburbs. We’ve learned that a crown on a shared breast is rarely a simple one-flue job, and we approach every Hunting Park call that way.
We handle the full system under one company: sweeping, cap and crown, liner installation, full rebuilds, and fireplace repair. No handoffs. If the crown work turns up a cracked clay tile behind the parging, we can talk through relining with the same visit instead of sending you to a stranger.
Above all, we’re honest about what we find. On a Hunting Park chimney that shares a stack with the next unit, the honest answer sometimes means telling you a cap is fine and the crown just needs coating, or that the neighbor’s side needs a conversation before we touch anything. That’s the answer you’ll get.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Hunting Park
Cap Installation
A new cap on a Hunting Park rowhouse has to seal off the flue openings you actually have, not the single opening a suburban chimney has. We size the cap to the shared breast, check the flashing joint, and set it with a connection that holds through freeze-thaw. Call (855) 974-3360 and we’ll tell you what fits your stack.

Cap Replacement
Old caps on Hunting Park homes tend to fail at the seams, not the top. A single-flue cap fitted over one opening of a shared chimney breast leaves the neighbor’s flue and the unused gas-retrofit flue open to rain, birds and downdraft. We pull the old cap, check both openings, and fit a replacement that seals each flue independently.

Crown Repair
The crown is where most Hunting Park water damage starts. Philadelphia’s freeze-thaw cycle cracks the mortar wash on exposed crowns, and each winter opens the crack a little wider. We repair at the crown itself, rebuilding the mortar to a proper slope so water sheds off the shared breast instead of channeling in.

Crown Coating
For crowns without structural damage, a coating seals the surface and stops water wicking into the brick. On a shared breast, one face of the crown is often parged or painted while the adjoining face is bare brick, and the two surfaces age differently. We coat the whole crown, not just the visible face, so neither unit inherits the other’s problem.
Multi-Flue Cap
This is the work Hunting Park actually calls for. We fit a multi-flue cap that seals each flue opening independently on a shared stack, including the flue that was retired when a unit was converted to gas. Each opening gets its own seal.
Custom Cap
Where a rowhouse stack has unusual dimensions, we build a custom cap to fit. That can mean a Hunting Park chimney breast where two flues run side by side with no standard cap that covers both cleanly.
Trusted Brands We Service in Hunting Park
We specify professional-grade materials because your chimney vents fire. That means brands like Gelco, Olympia Chimney, and Copperfield on cap and crown work, and HeatShield or DuraFlex liner systems when a job needs relining. We don’t claim to carry a warehouse of parts, but we do use the materials certified chimney professionals specify, and we source what fits your chimney’s actual condition rather than a one-size-fits-all cap.
Common Chimney Cap & Crown Problems We See in Hunting Park Homes
- Single-flue caps on shared breasts. A single cap fitted over one opening of a shared chimney leaves the neighbor’s flue and the unused gas-retrofit flue open. Rain, birds and downdraft get in through the openings nobody sealed.
- Cracked clay tile behind a parged crown. When only the cap is replaced, the damaged clay tile liner stays hidden and keeps wicking moisture into the shared brick. The fix has to look under the parging, not just at the crown face.
- Freeze-thaw cracking on exposed crowns. Philadelphia’s winters crack the mortar wash, and each crack channels water into the party-wall flue. In the adjacent unit, that shows up as a draft or a damper problem nobody can trace.
- Retired flues left uncapped. Some Hunting Park units switched to gas and left the old wood flue unused but open. Without a cap, that flue becomes a collection point for water and debris.
Pricing for Chimney Cap & Crown in Hunting Park, PA
Cap and crown work here isn’t priced like a single-flue suburban job, and it’s better to know that up front. Typical estimates in the Hunting Park market look like this:
- Standard single-flue cap installation: roughly $175 to $320
- Multi-flue cap for a shared Hunting Park breast: roughly $300 to $600
- Crown repair, rebuild, or coating: roughly $350 to $900 depending on how far the damage runs
A custom cap sized to an unusual shared stack runs higher, and a crown repair that turns up cracked clay tile behind the parging will add liner work to the job. You get a written estimate before any work is booked, so the price is set per job, not by a range that drifts. The estimate is free.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Hunting Park
We serve Hunting Park and the surrounding neighborhoods, including Olney, Kensington, Port Richmond and Fishtown. The same attached-rownhouse conditions show up across all of them, and so does the party-wall coordination. Call us for a free estimate wherever you are nearby.
Building Around a Shared Chimney Breast in Hunting Park
Hunting Park is a dense, historic Philadelphia rowhouse neighborhood where most chimney work involves century-old brick stacks shared between attached homes. That changes the whole job. Because adjacent rowhouses share a single chimney breast, a crown or cap installed on one unit often has to be fitted around a party-wall flue serving the neighbor’s appliance. The cap has to be sized and sealed for more than one flue opening, and some of those openings the homeowner doesn’t control.
Philadelphia’s freeze-thaw winters hit that shared breast unevenly, since one exposed face of the crown is often parged or painted while the adjoining face is bare brick. Those two faces age at different rates, and the crack tends to start where they meet.
In a typical Hunting Park rowhouse, moisture gets into the shared breast through a washed-out mortar crown and cracked flashing, then spalls the painted brick face and finds its way down a flue that was retired when the house was converted to gas. A qualified local technician runs a Level 2 inspection to check both the active and unused flues, confirms whether a neighbor’s appliance vents into the same stack, then rebuilds or coats the crown and fits a multi-flue cap that seals each opening independently. Where the party-wall flue is involved, the fix usually depends on coordinating access and approvals with the adjoining homeowner before any mortar or cap work goes up. That’s not a formality. It’s the difference between a sealed crown and a job that opens a leak into the next home.
Serving Hunting Park, PA – Our Local Coverage Area
We serve Hunting Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Hunting Park
It changes the sizing, the sealing, and who you have to coordinate with before work starts. A shared breast usually carries two flues, and a standard single-flue cap won’t seal both. We run a Level 2 inspection to map every opening on the stack, including the party-wall flue, then fit a multi-flue or custom cap positioned so each opening is sealed independently. Where the party-wall flue is involved, we talk through access and approval with the adjoining homeowner before we touch the crown. Call (855) 974-3360 and we’ll walk through it.
Yes. An unused flue is still an open hole in your roof, and on a Hunting Park shared breast it’s also a path for water and downdraft to reach the neighbor’s side. A multi-flue cap seals the retired opening alongside the active one, so the flue you’re not using stops being a problem. We can look at yours and tell you what fits on a free estimate.
Philadelphia’s humid summers and freeze-thaw winters accelerate mortar joint deterioration on old exposed brick crowns, and a crack that opens in winter lets water in all spring. On a shared breast the problem gets worse because one face of the crown is often parged or painted and ages differently from the bare brick next to it. Crown repair or coating rebuilds the mortar wash to a proper slope so water sheds off. Call (855) 974-3360 for a free quote on what your crown actually needs.
Sometimes, but not always, and it depends on which flue is drafting badly. A cap can stop downdraft from wind coming over the stack, and sealing an unused gas-retrofit flue can stop cross-draft pulling smoke down the active one. But if the draft is coming from the party-wall flue where rain got in through a cracked crown, the crown is the real fix. We check both before recommending either.
A Level 2 inspection covers both the active and unused flues, the crown and cap condition, the flashing joint, and whether a neighbor’s appliance vents into the same stack. On the shared breasts common in Hunting Park, that last check is the one that changes the job plan. We document what we find, then give you a written estimate before anything is booked. The estimate is free.
One Crew, Every Layer of the Chimney
Cap and crown work is where we start on most Hunting Park rowhouses, but it rarely stops there. Our chimney cap & crown team can handle the crown, the cap, the flashing, and any liner work the inspection turns up, with the same team doing all of it. Built to last, not patched to pass inspection. Call (855) 974-3360 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Kensington.