Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Frankford
If you burn wood in Frankford, your chimney is probably working harder than you think. Most of the housing here is attached, and that changes everything about how a sweep should be done. We know these blocks well, from the narrow alleys behind the rowhouses to the closely packed stacks on the roofs above them. Our technicians have up to 9 years of experience, and they’ve learned that a Frankford chimney rarely gets a simple brush-and-go. Call (855) 974-3360. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A Frankford rowhouse sweep often means checking a shared or closely spaced stack, not just your own flue.
- Early-20th-century brick homes here commonly have coal-era chimneys converted to wood or gas, with clay tile that’s showing its age.
- Freeze-thaw winters and humid summers speed up masonry spalling on these old chimneys.
- Nothing gets recommended without camera evidence you can see for yourself.
Why Frankford Homeowners Call Chimney Sweep Kensington for Chimney Sweep
Frankford’s rowhouse stock is dominated by early-20th-century brick homes with original internal chimneys that were built for coal and later converted. That history matters. A chimney cleaning here is rarely a simple sweep; it’s usually an inspection for deteriorated parging, unlined flues, and debris left behind by decades of fuel switching. We build our work around that reality instead of pretending every flue is a clean, modern liner.
We also handle the whole system, not just the brush. That means cap and crown work, liner installation with systems like HeatShield and DuraFlex, full rebuilds, and fireplace repair, all under one company. You don’t get handed off to a different contractor when the inspection turns up something structural. The same team that sweeps your Frankford chimney can tell you what the flue actually needs and do the work.
We specify professional-grade materials because your chimney vents fire. The brands on our roster, including Gelco, Olympia Chimney, and Famco, are the kinds certified chimney professionals rely on. Our reputation in Frankford comes from doing thorough inspections and giving straight answers about what can wait and what can’t. We don’t claim a review count or a rating we can’t back up, and we don’t upsell. You get camera evidence, a photo report, and a written estimate before anything is booked.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Frankford
Every job starts with knowing what your specific chimney is dealing with. On Frankford’s tightly packed blocks, that means looking beyond your own flue.
Level 1 Inspection
A Level 1 inspection covers the readily accessible parts of your chimney: the firebox, the damper, the visible flue, and the cap from the ground or a basic roof look. For many Frankford homeowners who burn regularly and haven’t changed anything about their setup, this is the annual baseline. It confirms whether the flue is clear and whether anything obvious has shifted since last season. If we spot something that needs a closer look, we say so and explain why.

Level 2 Inspection
A Level 2 inspection is what most Frankford rowhouses actually need, especially the first time we see a chimney. It includes a camera scan of the flue interior, which is how you find the problems a visual check misses: failed mortar joints, spalled parging, unlined sections, and debris dropped in from a neighboring stack. This is also the level required after a chimney fire, a fuel change, or a property sale. We include the camera inspection and a photo report so you can see exactly what we see before any work is recommended.

Creosote Removal
Creosote builds up in layers, and the glaze that forms in a hot-burning flue can be stubborn. On Frankford’s older brick chimneys, a tar-glazed flue is not something a routine brush removes. Third-degree creosote is the flammable kind, and it needs chemical removal or, in some cases, relining. We assess the stage before we start, and we won’t treat a glazed flue like an ordinary sweep.

Soot Removal
Soot is the fine, powdery residue that coats the smoke chamber and flue after burning. It restricts draft and dulls your fireplace’s performance. In Frankford’s humid summers, soot combined with moisture can also speed up the corrosion of any metal components in the system. A proper soot removal clears the smoke chamber and shelves so the chimney can vent the way it should.
How Attached Rowhouse Chimneys in Frankford Create Real Problems
On Frankford’s attached rowhouse blocks, original coal-era chimneys often share a single stack or sit inches apart. That means a sweep on one address routinely turns up nest debris or creosote fallout from the neighbor’s flue. Cross-contamination is the first thing a local technician checks, because it’s the most common reason a chimney that was “just cleaned” still drafts poorly.
Picture how this usually goes. A homeowner lights the first fire of fall and smells smoke backing into the room, or notices soot streaks on the wall above the firebox. A qualified local sweep typically finds a failed mortar joint on the shared or closely spaced flue, or a partially blocked cap that lets debris from the adjacent stack drop in. After a Level 2 inspection, the flue gets cleared, the crown or flashing gets repaired, and the smoke chamber gets checked for spalling before the first hard freeze.
Roof access adds another layer. Narrow alleys and closely packed rooftops mean technicians have to move carefully and often work from tight vantage points. It’s not a job for a quick walk-up with a ladder and a brush. Heavy water intrusion is the leading cause of chimney deterioration, and a hairline crown or flashing failure on a tightly packed Frankford roof turns into spalling masonry and interior water damage fast.
Philadelphia’s freeze-thaw winters and humid summers accelerate masonry spalling and flue deterioration in these older chimneys, which makes annual cleaning and inspection more critical here than in milder climates. Water gets into a small crack, freezes, expands, and widens it. Repeat that cycle a few winters and a repairable crown becomes a rebuild. For the full range of what we handle, see our chimney sweep services.
Trusted Brands We Service in Frankford
We work with the professional-grade brands the trade actually trusts: Gelco, Olympia Chimney, Famco, and Copperfield, along with HeatShield and DuraFlex liner systems. What that means for you is choice based on your chimney’s real condition rather than a one-size-fits-all upsell. A deteriorated flue might call for resurfacing, a full reline, or a rebuild, and the right material depends on what the camera shows. We don’t stock parts on a truck; we specify and order what your chimney needs, which keeps the material matched to the job.
Common Chimney Sweep Problems We See in Frankford Homes
- Shared-stack cross-contamination. When chimneys share a stack or sit inches apart, a sweep of your own flue can miss debris from the neighbor’s side. That debris lodges in the flue and restricts draft, so the chimney never quite works right.
- Hairline crown and flashing failures. On tightly packed rowhouse roofs, a small crown crack goes unnoticed until water shows up as spalling masonry or a damp stain inside the chimney chase. By then it’s structural, not cosmetic.
- Tar-glazed third-degree creosote. Hot-burning flues develop a glaze that a routine brush won’t touch. Treating it like an ordinary sweep leaves the flammable layer in place, which is where chimney fire risk comes from.
- Coal-era conversions with aging or missing liners. Many Frankford chimneys were built for coal and later switched to wood or gas. The original clay tile is showing its age, and some sections have no liner at all.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Frankford, PA
We keep pricing straightforward so you know what to expect before we arrive. A standard annual sweep and Level 1 inspection in Frankford typically runs $150 to $250. A Level 2 inspection with a camera scan and photo report usually falls between $200 and $400, and it’s the one most rowhouses need at least once. Creosote removal runs $200 to $450 depending on the stage, and chemical removal of third-degree glaze sits at the upper end. Soot removal and fireplace cleaning typically run $100 to $220. Cap and crown repairs vary with the roof access, so those are quoted per job.
Every price is an estimate until you have a written quote, and the written estimate sets the final price. The estimate is free, and nothing gets booked until you’ve seen the camera evidence and know what’s actually needed.
We Also Serve Cities Near Frankford
We work across Frankford and the surrounding neighborhoods. If you’re in Olney, Kensington, Port Richmond, or Hunting Park, we can help with the same full-system chimney service. Those blocks share the same older rowhouse stock and the same attached-stack quirks, so the approach doesn’t change much. Call us and we’ll talk through your chimney, wherever you are in the area.
Serving Frankford, PA – Our Local Coverage Area
We serve Frankford and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Frankford
Poor draft after a sweep usually means debris from a neighboring flue is still lodged in the shared or closely spaced stack, or the cap is partially blocked. A Level 2 camera inspection finds it. Call (855) 974-3360 for an exact quote; estimates are free.
Yes. When two flues share a stack or sit inches apart, debris and creosote fallout from one can drop into the other through a failed mortar joint or an open cap. That’s why we check the whole shared structure, not just your side. Call (855) 974-3360 for an exact quote; estimates are free.
You can’t tell by looking from the firebox; third-degree creosote is a tar-like glaze that needs a camera scan to confirm. Once we see it, we recommend chemical removal or relining rather than a routine brush. Call (855) 974-3360 for an exact quote; estimates are free.
A Level 1 covers the accessible firebox, damper, and visible flue; a Level 2 adds a camera scan of the flue interior and a photo report. On attached rowhouses, the Level 2 is what catches shared-stack problems. Call (855) 974-3360 for an exact quote; estimates are free.
Yes, even with light use. Nest debris, moisture, and cross-contamination from neighboring flues build up regardless of how often you burn, and the freeze-thaw cycle keeps working on the masonry. An annual check catches small problems before they get structural. Call (855) 974-3360 for an exact quote; estimates are free.
Book Your Frankford Chimney Sweep
If you’ve got smoke backing into the room, soot streaks above the firebox, or you simply haven’t had the chimney looked at in a while, now is the time. We handle everything from the top of the cap to the firebox floor, with camera evidence and a photo report so you can see exactly what your chimney needs. Call (855) 974-3360 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Kensington.