Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Ardmore, PA
We provide independent HeatShield service across Ardmore for the borough’s large stock of pre-1940 masonry chimneys. The one thing that makes our HeatShield work here different: most Ardmore flues were built for coal, later switched to oil and gas, and are now unlined or lined with clay tile that has already been resurfaced once or twice. Resurfacing that kind of flue takes a careful Level 2 inspection first, not a straight application.
Our technicians have up to 9 years of experience with the products, and we’re not affiliated with or authorized by HeatShield. We’re an independent shop that repairs, installs and services the equipment with parts that fit it. Call (855) 974-3360. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Ardmore Residents Choose Us for HeatShield Service
Ardmore homes ask for a different approach than newer construction out west. Those colonials, Tudors and twins from roughly 1900 to 1940 have exterior masonry chimneys, original clay-tile flues and slate roofs – and many have already been relined or resurfaced at least once. We know how those flues behave, and we’re honest about when a HeatShield system makes sense and when it doesn’t.
We use only HeatShield-manufactured sealants, primers and liner materials. No generic substitutes. The system’s performance depends on correct chemistry, so mixing brands to save a few dollars usually costs more later. Our work covers the whole chimney: HeatShield resurfacing, crown work, waterproofing, liner installation and fireplace repair. When a flue is too far gone for resurfacing, we say so and quote the right repair instead.
Scheduling is straightforward. We send a written flat-price estimate before booking, so you know the scope in advance. We serve Ardmore and the neighborhoods around it with the same approach every visit.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Ardmore
HeatShield coatings fail for specific reasons, and in Ardmore those reasons usually trace back to the town’s housing stock and weather. Here are the failures we see most, and why they happen here.
- Liner adhesion failures from spalled clay tiles. Unlined or badly cracked clay flues hold dust and loose brick, so a coating won’t bond. Proper cleaning and priming come first, and skipping that step is the most common reason a HeatShield job underperforms.
- Coating delamination from cracked crowns. Exterior brick chimneys let water in through a cracked crown, and that moisture works its way behind the resurfacing from the inside. Freeze-thaw winters here crack crowns regularly, so crown repair and resurfacing belong together.
- Liner separation from freeze-thaw movement. Repeated freezing and thawing widen mortar joints around exterior masonry. When a joint opens behind a HeatShield liner, the liner can pull away from the flue wall.
- Party-wall problems on Ardmore twins. On twin and row homes around downtown Ardmore, adjacent chimneys share a stack. A failed flashing or crown on one side lets water travel through the shared masonry and undermine a liner installed on the other side.
- Coating failure on flues that were relined before. Plenty of Ardmore chimneys have been relined once or twice already. When we find an older reline that’s failing, the fix depends on what’s underneath it, not on what looks easiest.
HeatShield Service in Ardmore: What Local Conditions Mean for Your Equipment
Ardmore’s chimney work is dominated by the dense stock of pre-1940 Main Line borough homes: tall brick and stucco-over-masonry colonials and twins with original unlined or clay-tile flues. Those flues were built for coal, later retrofitted to oil and gas, so most jobs here involve evaluating an aging interior flue rather than a clean modern stainless liner. Add Southeastern Pennsylvania’s freeze-thaw winters and humid summers, and you get crowns and mortar joints that crack from repeated freezing, damp shoulder seasons that speed creosote buildup, and spalling flue tiles that need inspection, not a quick sweep. Steep rooflines and slate or standing-seam roofs make access slower too.
Here’s how that affects a typical job. A homeowner in a 1920s Ardmore colonial notices a musty smell and a water stain on the ceiling near the chimney during a spring thaw. A qualified technician performs a Level 2 inspection and finds the original clay-tile flue has spalled joints and a cracked exterior crown, letting moisture penetrate behind the tiles. After cleaning and minor masonry repair, the technician applies HeatShield Flue Sealant to restore the flue’s integrity, then coats the crown with HeatShield Crown Coat to prevent recurrence. That sequence – inspect, repair, seal, protect – is what the freeze-thaw cycle here rewards.
HeatShield Models & Products We Service in Ardmore
We service the HeatShield product line as it’s actually applied to masonry chimneys: HeatShield Flue Liner for flues that need a structural resurfacing, HeatShield Flue Sealant for smaller cracks and joints, HeatShield Crown Coat for the masonry crown, and HeatShield Water Repellent for the exterior brick above the roofline. Which one your chimney needs depends on the inspection, not on a package.
Every job uses HeatShield-manufactured primers and sealants matched to the system. We don’t substitute generic materials, because the manufacturer’s warranty and the system’s performance both depend on the right chemistry. We measure the flue, check the tile condition and the crown, then recommend the smallest job that fixes the actual problem. Sometimes that’s a sealant and a crown repair. Sometimes it’s a full reline, and we’ll tell you that plainly.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Ardmore
HeatShield work is priced per job, and the written estimate sets the final price. We work through the scope with you first, then put it in writing before booking. Typical ranges for this kind of work in Ardmore:
- Level 2 inspection: $150-$400, including camera inspection and photo report
- Standard sweep with inspection: $180-$340
- HeatShield Flue Sealant application: $450-$1,200 depending on flue length and access
- HeatShield Flue Liner resurfacing: $1,800-$4,500 depending on flue size and prep
- Crown repair with HeatShield Crown Coat: $350-$900
- Exterior waterproofing: $300-$800
Steep slate roofs, tight flue clearances and party-wall access on Ardmore twins all move the number. Nothing is recommended without camera evidence you can see for yourself. Call (855) 974-3360 – estimates are free.
Serving Ardmore, PA – Our Local Coverage Area
We serve Ardmore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Ardmore
HeatShield resurfacing coats the inside of the flue with a mortar-like product that restores a smooth, sealed surface, which is what an unlined 1920s flue in Ardmore usually needs. We clean and prime the flue first, because a coating won’t bond to soot or loose brick. After that we measure the flue to select the right system. If the bricks behind the flue are loose or crumbling, we’ll tell you a reline is the safer path. Call (855) 974-3360 for an exact scope and estimate – estimates are free.
Often, yes – spalling clay tiles can be resurfaced with HeatShield when the damage is surface-level. Spalling happens when moisture gets into the tile and freezes, and Ardmore’s freeze-thaw winters produce plenty of it. If the tiles are severely spalled or missing chunks, resurfacing may not hold, and a full reline or rebuild is the honest answer. A camera inspection tells us which case you’re in. Call (855) 974-3360 for a free estimate.
Because a lot of Ardmore twins and row homes share a party-wall stack, which means one side’s water problem can damage the other side’s liner. In Ardmore’s 1900-1940 twins, a cracked crown or failed flashing on the neighbor’s chimney lets water migrate through the shared masonry, and you don’t see it until the liner delaminates or a ceiling stains. We inspect the shared stack when access allows, and we explain what the neighbor’s side may need. Call (855) 974-3360 – estimates are free.
Yes, HeatShield Crown Coat is designed to protect the masonry crown from the water that drives freeze-thaw damage, and Ardmore’s climate makes that protection worth having. A crown is the chimney’s roof; when it cracks, water gets in and mortar joints fail from repeated freezing. Crown Coat seals the crown and flexes with the masonry instead of cracking. We pair it with crown repair where the masonry has already broken up. We answer 24/7. Call (855) 974-3360 for a free estimate.
HeatShield Flue Sealant is for small cracks and joint gaps, while HeatShield Flue Liner resurfacing rebuilds the interior surface of a flue. Sealant suits a flue that’s mostly sound but has open joints from freeze-thaw movement. Flue Liner suits a flue with widespread spalling or an unlined interior that needs a restored structural surface before it’s safe to vent fire. The Level 2 inspection decides which one your chimney needs; we won’t recommend the bigger job without evidence. Call (855) 974-3360 for a free estimate.
Service Areas Near Ardmore
We serve HeatShield customers in Lower Merion and Upper Darby, along with nearby East Lansdowne, Southwest Philadelphia and Eastwick. Ardmore homeowners in the older twin and colonial blocks get the same Level 2 inspection, HeatShield resurfacing and crown work as the surrounding towns. If you’re just outside the borough line, call and we’ll confirm coverage.
Book Your HeatShield Service in Ardmore Today
If your Ardmore chimney has a musty smell, a water stain, or an unlined flue that’s never been assessed, start with a Level 2 inspection and a written flat-price estimate. Nothing is recommended without camera evidence you can see. Call (855) 974-3360. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday; we’re closed Saturday. Estimates are free.
Written by the team at Chimney Sweep Kensington.