Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Upper Darby
If water is finding its way into your chimney, a properly sized cap and a sound crown are what stop it. Chimney Sweep Kensington installs and repairs caps and crowns for homeowners all over Upper Darby, from the brick twins off Garrett Road to the older row houses near Lansdowne Avenue. We know how these chimneys were built and why they fail, and we bring the camera to prove what’s wrong before anyone quotes a repair. The work is small-footprint and the rooflines are tight here, so local experience counts. Call (855) 974-3360 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Upper Darby Homeowners Call Chimney Sweep Kensington for Chimney Cap & Crown
Upper Darby is one of the densest, oldest inner-ring suburbs in Delaware County, and its chimneys reflect that. Block after block of pre-1950 homes carry masonry stacks that have been through oil-to-gas-to-wood heating changes and decades of freeze-thaw. Homeowners here call us because we treat those chimneys as full systems, not just caps. Our technicians have up to 9 years of experience and handle everything from a routine cap swap to a crown rebuild, using professional-grade materials from brands like Gelco, Olympia Chimney, and Copperfield.
We’ve built a strong local reputation across Upper Darby by doing the job right rather than quoting fast. The estimate is free, the price is set per job by the written estimate, and we show you camera footage before recommending a single repair. That matters in a town where the rooflines are packed tight and a bad recommendation spreads to the next block. When we serve Upper Darby, we’re working in the same housing stock you live in every day, which sharpens how we read a problem. We work across the whole Upper Darby area and know the difference a shared wall makes.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Upper Darby
Cap and crown work is included as a service because it prevents the most common source of chimney water damage. Our chimney cap & crown team covers the full range below. One crew, every layer of your chimney system.
Cap Installation in Upper Darby
A missing or undersized cap lets rain straight down a compromised flue. On Upper Darby’s 1920s-1950s brick homes, that water hits original clay-tile liners that often have no separate liner at all. We size the cap to the actual flue opening and anchor it so it stays put through southeastern PA’s wet, windy winters.

Cap Replacement in Upper Darby
Old caps rust, dent, or come loose on the shared stacks common to Upper Darby twins. A replacement cap restores the dry flue and keeps animals and debris out. We match the cap to the flue count and the stack geometry, not a generic off-the-shelf size.

Crown Repair in Upper Darby
On Upper Darby’s pre-1950 brick twins, the crown is usually the first thing to go. A shallow mortar wash that was never properly overhung cracks along the flue edge, and water runs into the masonry. Crown repair rebuilds or coats that surface with an overhanging drip edge so freeze-thaw water sheds away from the brick instead of soaking in.

Crown Coating in Upper Darby
When a crown is intact but starting to craze, a flexible crown coating seals the surface without a full rebuild. It’s a lower-cost option for crowns that haven’t yet cracked through. We tell you plainly when a coating will hold and when the crown has gone too far for it.
Multi-Flue Cap and Custom Cap in Upper Darby
Shared and multi-flue stacks are the norm on Upper Darby twins, and they need caps sized and anchored for more than one opening. A custom cap fits the exact footprint of the stack and the way the two sides share it. This is where a generic cap fails and a built-to-fit one lasts.
Trusted Brands We Service in Upper Darby
We work with the professional-grade brands certified chimney technicians specify, including Gelco, Olympia Chimney, Famco, and Copperfield, as well as HeatShield and DuraFlex for liner systems. That range matters here because Upper Darby chimneys are rarely one-size: some need a crown rebuild and a standard cap, others need a custom multi-flue cap built for a shared stack. We match the material to your chimney’s actual condition rather than pushing one product. We don’t hold local parts stock, so turnaround is scheduled per job, but the brands we specify are the ones built for this climate and this housing stock. Built to last, not patched to pass inspection.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Upper Darby Homes
- Missing or undersized caps on unlined flues. Original clay-tile flues with no separate liner, often venting a modern gas appliance the 1920s stack was never sized for. A missing cap lets water straight into that compromised flue.
- Shallow wash-over crowns cracking at the flue edge. Freeze-thaw cycles push water into the crack, and the exterior brick and mortar joints spall on tightly packed rooflines. It’s the most common crown failure we find in Upper Darby.
- Shared party-wall chimney masses on twins. A one-sided cap or crown repair leaves the neighbor’s flue exposed or anchors the two sides inconsistently. Both sides need to agree before work starts.
- Heavy creosote condensation from the damp shoulder seasons. Southeastern PA’s long wet springs and falls drive creosote buildup in wood-burning units, and a dry, capped flue is the first line of defense against it.
Pricing for Chimney Cap & Crown in Upper Darby, PA
Pricing here reflects the housing stock, not a flat menu. A typical cap installation in Upper Darby runs $250-$600, while a custom or multi-flue cap for a shared twin stack runs $450-$1,100. Crown repair starts around $350-$850, and a flexible crown coating generally runs $250-$500. What moves the number is the flue count, the condition of the brick beneath the crown, and whether the stack is shared. The final price is set by the written estimate after we’ve seen the chimney and run the camera. Nothing gets recommended without video evidence you can watch yourself, and if the crown can wait a season, we’ll tell you that too. Call (855) 974-3360 for a free estimate – estimates are free.
| Service | Typical Upper Darby range |
|---|---|
| Cap installation | $250-$600 |
| Custom or multi-flue cap | $450-$1,100 |
| Crown repair | $350-$850 |
| Crown coating | $250-$500 |
We Also Serve Cities Near Upper Darby
The same cap and crown work we do in Upper Darby extends to the neighboring communities we cover, including East Lansdowne, Lansdowne, Yeadon, and Darby. The older brick housing stock and shared-wall chimneys show up across all of these towns, so the approach is the same: inspect first, show the evidence, then quote. Call (855) 974-3360 to book.
Serving Upper Darby, PA – Our Local Coverage Area
We serve Upper Darby and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Upper Darby
Both owners do, together. Because so many Upper Darby twins physically share one chimney mass across the party wall, a cap or crown replacement is often a two-owner decision, and a cap sized and anchored for a shared stack has to be agreed on by both sides before a technician touches the flue. We walk both owners through the camera footage and the sizing so the choice is shared, not imposed by one side. Call (855) 974-3360 to get the conversation started.
You see the evidence before you agree to anything. This is where the industry’s worst upselling happens, so we start with a Level 2 inspection and a camera run, then show you the cracked crown, spalling brick, and glazed creosote on video. If the crown can be coated rather than rebuilt, we say so. And if it can safely wait, we tell you that too. Call (855) 974-3360 for a free estimate.
No. A cap keeps water out and protects the flue, but it cannot reline an unlined or damaged clay-tile flue. Those need a liner system, and we offer both HeatShield resurfacing and DuraFlex relining depending on the condition. A cap plus a correct liner is the real fix; the cap alone just keeps the compromised flue dry. Call (855) 974-3360 and we’ll inspect first.
Usually because it’s a shallow mortar wash that was never properly overhung, so water pools at the flue edge and freeze-thaw cycles split it open again and again. Southeastern PA’s wet winters and humid summers accelerate mortar joint breakdown on old exterior brick chimneys. A rebuild with a proper drip edge solves it for good; patching the same shallow wash just starts the cycle over. Call (855) 974-3360 for the fix that holds.
Often yes. The long damp shoulder seasons here drive heavy creosote condensation in wood-burning units, so a yearly brushing is the floor, not the ceiling. If the camera shows glazed creosote or liner damage, the flue needs more than a sweep. We check and show you what we find. Call (855) 974-3360 for a free estimate – we’ll tell you honestly what your flue needs.
Chimney caps and crowns are the cheapest protection you’ll ever put on a chimney, and in Upper Darby’s older brick housing they’re the first line of defense against water and freeze-thaw damage. One crew handles your cap, crown, liner, and rebuild without a handoff. The estimate is free, the camera evidence is yours to see, and the written estimate sets the final price. Call (855) 974-3360. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Kensington.