Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Southwest Philadelphia
If your chimney cap is missing, rusted through, or your crown has cracked and started shedding mortar, we can help. Chimney Sweep Kensington handles chimney cap and crown work across Southwest Philadelphia, from simple cap replacements on a single-flue rowhouse stack to poured crowns and custom multi-flue caps on shared party-wall chimneys. We know these blocks well: the tight rowhouse streets off Woodland Avenue, the long brick runs through Kingsessing and Elmwood, and the coal-era flues that were never designed for today’s gas appliances. Local knowledge matters here, because a chimney problem on one side of a party wall rarely stays on one side. Call (855) 974-3360. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Southwest Philadelphia Homeowners Call Chimney Sweep Kensington for Chimney Cap & Crown
We’ve built a strong local reputation in Southwest Philadelphia by showing homeowners what’s actually wrong before recommending anything. On these blocks, that matters more than a fancy brochure. Our technicians have up to 9 years of experience, and they’re used to the specific construction here: single-party-wall chimneys, original coal-era flues, and mortar crowns that have been through decades of freeze-thaw.
Homeowners in Southwest Philadelphia call us back because we put a camera down the flue and show them the footage. If a crown just needs coating, we say so. If a cracked tile behind the crown is the real problem, we show that too. No guessing, no pressure.
We work with professional-grade materials from Olympia Chimney, Famco, and Copperfield, and we treat every recommendation as something you should be able to verify yourself. When we’re working in Southwest Philadelphia, we also know that a call is often about more than one house, because shared stacks mean shared consequences. That shapes how carefully we look at the roofline.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Southwest Philadelphia
We handle the full range of cap and crown work, and we tailor the fix to the chimney’s actual condition. Here’s what each service covers.
Cap Installation in Southwest Philadelphia
A properly sized cap keeps rain, birds, and mortar debris out of the flue, and on Southwest Philadelphia rowhouses that were re-tapped for gas appliances, an open stack is an invitation for water to speed up tile and mortar deterioration. We install single-flue and multi-flue caps sized to the actual flue opening, not a generic off-the-shelf fit. On exposed rooflines along the open blocks near the Heinz Refuge side of the neighborhood, wind-driven rain makes a snug, well-anchored cap especially worthwhile.

Cap Replacement in Southwest Philadelphia
Older caps rust, loosen, or get knocked askew by wind, and a cap that’s no longer seated properly can do more harm than good. We pull the old unit, check the flue tile and crown underneath, and set a new cap with proper anchoring. On the 1920s-1940s brick rowhouses throughout Kingsessing and Elmwood, we routinely find caps that were sized for a coal-era flue and never updated after the stack was converted, so the replacement has to account for what’s venting now.

Crown Repair in Southwest Philadelphia
The crown is the mortar cap at the top of the stack, and on these older chimneys it’s usually the first thing to fail. Decades of freeze-thaw on aging brick masonry crack and spall the original mortar, and once water gets in, it tracks down the masonry. We rebuild or repair crowns with proper slope and overhang so water sheds away from the flue instead of into it. This is the service we’re called for most often in Southwest Philadelphia, and it’s where careful diagnosis pays off.

Crown Coating in Southwest Philadelphia
For hairline cracks and surface deterioration, a crown coating can add years to a crown that’s still structurally sound. It’s a good option when the camera inspection shows the flue and crown are intact but the surface is weathering. We use coatings matched to the masonry, and we tell you plainly when coating is the right call and when a repair or rebuild makes more sense. On a well-maintained Southwest Philadelphia rowhouse, a coating can be the difference between a small fix now and a rebuilt crown later.
Trusted Brands We Service in Southwest Philadelphia
We install and service industry-recognized brands, including Olympia Chimney, Famco, Copperfield, and DuraFlex, because your chimney vents fire and the materials should be specified for the job, not picked off a shelf. We don’t stock parts on trucks or run a warehouse; we specify the right product for your chimney’s condition and source it for the job. That means turnaround stays quick without cutting corners on what goes on your roof. If you have an existing cap or crown component from one of these makers, we can evaluate it and match a replacement that fits your stack properly.
Common Chimney Cap & Crown Problems We See in Southwest Philadelphia Homes
Most of what we find on Southwest Philadelphia roofs comes down to age, weather, and past conversions that were never finished properly. Here’s what shows up again and again.
- Cracked, spalling mortar crowns on coal-era flues. The original crowns on these early-20th-century rowhouses have been through decades of freeze-thaw, and once they crack, water tracks down into the masonry. On shared stacks, that water can show up as a ceiling stain next door before the owner of the faulty crown notices anything.
- Missing or undersized caps on re-tapped stacks. Many Southwest Philadelphia chimneys were converted from coal to gas or oil without updating the cap, so rain gets in and speeds up tile and mortar deterioration in flues that run too cool to dry out.
- Crowns patched without looking at the flue. A new crown over a cracked tile or undersized liner is money spent on the wrong problem. That’s the upselling pattern we see most, and it’s why we run a camera first.
- Shared party-wall water intrusion. In blocks like Elmwood and Kingsessing, a single stack often straddles the party wall, so a failed crown on one side lets water migrate along the shared masonry. We check both sides of the stack before calling a job done.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Southwest Philadelphia, PA
Here’s what this work typically runs in Southwest Philadelphia. A standard single-flue cap installation runs $185-$420, depending on flue size and anchoring. Cap replacement with inspection of the flue and crown underneath runs $220-$480. Crown repair or rebuild runs $450-$1,400, with the upper end covering a full poured or reconstructed crown on a shared stack. Crown coating for hairline cracks runs $280-$650. A multi-flue or custom cap for a multi-flue stack runs $350-$900.
What moves the number is the condition of the crown and flue, whether the stack is shared, and how much masonry repair is needed before a cap goes back on. Every job is priced per job by a written estimate, and the estimate is free. We don’t recommend anything without camera evidence you can see for yourself.
We Also Serve Cities Near Southwest Philadelphia
We work throughout Southwest Philadelphia and the surrounding area, including Eastwick, East Lansdowne, Lansdowne, and Yeadon. If you’re just outside the neighborhood, the same approach applies: camera inspection first, evidence before recommendations, and a written estimate up front. Call and tell us where you are; we’ll set up a time to take a look. You can also read more about our Southwest Philadelphia service area and what we cover block by block.
Serving Southwest Philadelphia, PA – Our Local Coverage Area
We serve Southwest Philadelphia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Southwest Philadelphia
Both sides get inspected, and the crown repair goes on whichever side is actually failing. On a shared stack, the crown usually spans the full masonry, so a single repair often addresses both properties, but the flashing and the flue tie-ins on each side still need checking. We run a camera on both sides and show each homeowner the footage. Call (855) 974-3360 and we can walk you through it – estimates are free.
You see the camera footage and the roofline photos before anything is recommended. If the crown has hairline cracks and the flue is sound, that’s a coating conversation, not a rebuild. If there’s a cracked tile or a broken crown, we show you that too. You decide with the evidence in front of you. Call for a free estimate and we’ll inspect first.
Not by itself. A cap and crown protect the top of the stack from water and debris, but they don’t create a liner where there isn’t one. If the flue is unlined or undersized for the appliance, that’s a separate evaluation, and we’ll show you the flue condition on camera so you understand what’s actually venting. Call (855) 974-3360 to set up an inspection – estimates are free.
Usually because the repair covered the symptom without fixing the cause. On coal-era brick, freeze-thaw cycles are hard on any crown that isn’t sloped and overhung properly, and a patch that doesn’t shed water will crack again. We rebuild or coat with the right slope and materials so it holds. If you’ve had a crown fail more than once, call for a free estimate and we’ll look at why.
If the stack serves more than one flue, yes, a multi-flue cap sized to the actual openings is the right choice. A single generic cap over a multi-flue stack leaves gaps that let rain and birds in, and it won’t anchor properly on the wider masonry. We measure the stack and specify the cap for the fit. Call (855) 974-3360 to get it measured – estimates are free.
Get a Free Estimate on Chimney Cap & Crown in Southwest Philadelphia
If your cap is loose, your crown is cracked, or you’re not sure what’s going on up there, call us. We’ll come out, inspect the flue and crown, and show you what we find before recommending any work. Call Chimney Sweep Kensington at (855) 974-3360 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You can also learn more about chimney cap & crown work and what a thorough inspection covers.
Written by the team at Chimney Sweep Kensington.