Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Eastwick
If your chimney crown is crumbling at the roofline, the fix usually starts with stopping water, not with a sweep. Eastwick homes sit in the Delaware River and Cobbs Creek floodplain, and that river-bottom humidity works on mortar and brick long before it ever touches a flue. We handle crown repair and custom cap work for these rowhouses, and we know what a failing crown looks like on the older rows near the creek. Our technicians have up to 9 years of experience. Call (855) 974-3360 for a free estimate, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a pro out to look at the top of your stack.
Why Eastwick Homeowners Call Chimney Sweep Kensington for Chimney Cap & Crown
We work the mid-century brick rowhouses and small twins that make up most of Eastwick, and that changes how we approach cap and crown work. The party-wall stacks here are tightly packed, the flues are often shared or crowded together, and a standard off-the-shelf cap won’t seal right on half of them. That’s why we lean on custom and multi-flue caps, sized to the actual stack instead of a measurement someone guessed at. We also handle the structural side – crown rebuilds, spalled brick, and the waterproofing that goes with them – rather than handing you to another contractor once the job gets bigger than a cleaning. We specify professional-grade materials like Gelco and Olympia Chimney because your chimney vents fire. One team stays accountable from the cap down to the firebox floor. Eastwick customers tell us the same thing: they want the water problem diagnosed and fixed correctly, not quickly. That’s the standard we hold to. Call (855) 974-3360 to book an estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Eastwick
Water intrusion drives most of what we do in Eastwick, so crown and cap work gets prioritized over routine sweeping on a lot of these homes. Here’s how the main services break down.
Cap Installation
A properly fitted cap keeps rain, animals, and debris out of the flue, and on Eastwick rowhouses the fit matters more than the brand. The taller the stack and the closer the party-wall neighbor, the less room you have for a cap that overhangs the wrong way. We measure your actual flue opening and install a cap sized to it, using professional-grade materials built for a wet climate. A cap that seals right is the cheapest water defense a chimney has.

Cap Replacement
Old galvanized caps rust through from the underside, and in this river-bottom humidity they don’t last as long as their label implies. When the cap is loose, dented, or the mesh is torn, animals get in and rain blows down the flue unchecked. We replace it with stainless or copper where the budget allows, matching the new cap to the flue and to the coursing of your chimney. Replacement is quick work once we’ve seen the top of the stack.

Crown Repair
The mortar crown is the concrete pad at the very top that sheds water away from the brick below. In Eastwick it’s often the first thing to go – persistent damp softens the mortar, and the crown cracks and crumbles from the outside in. A failed crown lets water soak down into the chimney structure, which mimics a flue problem and fools a lot of homeowners into the wrong repair. We rebuild the crown with a proper slope and drip edge, so water leaves the masonry instead of soaking into it.

Crown Coating
When a crown is cracked but not yet collapsed, a flexible coating can buy years before a full rebuild is needed. It seals the hairline cracks that let water in during our freeze-thaw winters and lasts well if applied to a sound surface. We’ll tell you honestly when a coating is enough and when the crown has gone too far for one. Anything that can safely wait, we say so.
Trusted Brands We Service in Eastwick
We work with the professional-grade brands that certified chimney technicians specify: Gelco, Olympia Chimney, Famco, and Copperfield. You won’t see us fitting a bargain-bin cap that rusts out in two winters. Because we don’t keep every part on hand, we measure and specify the correct cap or crown material for your stack, then get it ordered and installed on a fast turnaround. If you’ve got questions about which brand suits a densely packed Eastwick rowhouse flue, that gets worked out at the estimate.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Eastwick Homes
- Crumbling mortar crowns. Constant floodplain humidity softens the mortar at the top of the stack, so the crown cracks and fails from the outside in. The leaks it causes look a lot like flue trouble, which is why these roofs need eyes on them, not a phone diagnosis.
- Spalling brick at the roofline. Once water gets into the masonry, winter freeze-thaw pops the brick faces off and the damage multiplies. On the older rows near the creek, spalling at the crown is often the first visible sign that moisture has been working in for a while.
- Party-wall stacks and tight flue spacing. Flues packed tightly between party walls leave little room for standard caps, so a poorly sized cap doesn’t seal, drafts get weird, and animals slip in through the gaps. Custom and multi-flue caps solve this where an off-the-shelf one won’t.
- Rusted-out old caps. Original galvanized caps on mid-century twins fail fast in this microclimate, and once the mesh goes, water and wildlife have a straight path down the flue.
Pricing for Chimney Cap & Crown in Eastwick, PA
What a cap or crown job costs in Eastwick depends mostly on the height and condition of your stack, whether the flues are packed tight enough to need a custom cap, and how much of the crown has to be rebuilt versus coated. Typical estimated ranges for Eastwick’s market run like this: a standard single-flue cap installation is roughly $250 – $550; a multi-flue or custom cap sized for tightly spaced rowhouse flues runs about $450 – $900; a full crown rebuild with a proper drip edge and overhang lands around $600 – $1,400; and a crown coating for a crown that’s cracked but not collapsed is roughly $300 – $650. These are estimates for the job, and the written estimate you get sets the final price. Nothing gets recommended without photo evidence you can see for yourself, and we’ll tell you plainly when a piece of work can safely wait. The estimate is free. Call (855) 974-3360 for an exact quote.
We Also Serve Cities Near Eastwick
We handle cap and crown work across the neighborhoods and towns around here too, including Southwest Philadelphia, Darby, East Lansdowne, and Lansdowne. If you’re just over the line from Eastwick and want the same moisture-first approach to your rowhouse stack, we can get a pro out to look at it. No handoffs to another contractor, no guesswork on which crew you’ll get.
Serving Eastwick, PA – Our Local Coverage Area
We serve Eastwick and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Eastwick
Because in Eastwick the crown usually fails before the flue ever needs sweeping – the persistent river-bottom humidity softens the mortar and the crown crumbles from the outside in, so a cap alone just sits on top of a leaking pad. The water is already getting into the brick below, and capping that over leaves the real damage to spread. Crown repair addresses the moisture at its source. Call (855) 974-3360 and we’ll look at the top of your stack and show you what’s happening.
Yes. On party-wall stacks with tightly spaced flues, a standard cap often won’t seal right, but a custom or multi-flue cap sized to your actual opening will. We measure your flue on-site and specify a cap that fits your side of the stack without interfering with your neighbor’s. Access to your side may mean coordinating with a neighbor’s roofline, which we work out at the estimate. Call (855) 974-3360 to schedule.
Once a year, even if the fireplace barely gets used. In Eastwick the risk isn’t creosote – it’s water, and a moisture-driven crown or brick failure can go unnoticed until it’s a much bigger structural repair. An annual look at the crown, cap, and mortar joints catches the problem while it’s still small. Call (855) 974-3360 to book an inspection.
A multi-flue cap covers several flues off one shared base, which suits rowhouses where flues are packed together; a custom cap is built to the exact dimensions of a single or unusual opening. Because Eastwick’s party-wall stacks and tight spacing make standard caps fit poorly, we often specify one or the other rather than an off-the-shelf size. We’ll tell you which fits your stack at the estimate. Call (855) 974-3360 for an exact quote.
Sometimes, if the draft issue comes from a missing, loose, or badly sized cap letting wind and rain into the flue – a sealed, properly sized cap steadies the draft. If the draft problem is caused by a shared or crowded flue or a moisture-damaged stack, the fix is more than a cap, and we’ll say so. Nothing gets recommended without camera evidence you can see. Call (855) 974-3360, and we answer 24/7.
When you’re ready to stop the water before it reaches the brick, reach out to our chimney cap & crown team. We’ll get a pro to your Eastwick home, walk the roofline, and put together a free estimate with photos you can check yourself. Call (855) 974-3360. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Kensington.