Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Ardmore
If you live in Ardmore and your chimney crown is cracking or your cap has rusted through, we can help. We work on chimney caps and crowns across Ardmore, from the tall brick colonials near the downtown business district to the twins and Tudors in the surrounding blocks of 19003. Older homes here have older chimneys, and that changes how a cap or crown job should be scoped. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 974-3360 for a free estimate.
Why Ardmore Homeowners Call Chimney Sweep Kensington for Chimney Cap & Crown
Ardmore’s housing stock is mostly early-20th-century brick and stucco colonials, Tudors, and twin and semi-detached homes built roughly between 1900 and 1940. Many of those chimneys still carry their original cast-mortar crown, and a lot of them have unlined or clay-tile flues that were first built for coal and later retrofitted to oil and then gas. That history shows up in nearly every cap and crown job we see in Ardmore.
Water damage is the reason most people call. A cracked crown lets meltwater into the masonry above the flue, and that water works its way down into the flue liner and smoke chamber. We treat crown repair as structural work, not cosmetic upkeep, because on an Ardmore chimney the crown is usually the first line of defense for everything below it.
We also know where the industry upsells. On Ardmore’s older flues, a recommendation for a full reline should never come before you’ve seen the camera footage yourself. We won’t suggest a crown rebuild, a liner, or a new cap without showing you the evidence. Our technicians have up to 9 years of experience, and they know what a coal-era flue in Ardmore actually looks like inside.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Ardmore
Cap Installation
A properly sized cap keeps rain, birds, and squirrels out of an open flue. On Ardmore’s older masonry chimneys, the cap has to be matched to the actual flue dimensions, not fitted generically. We install listed multi-flue and single-flue caps and set them to overhang the crown correctly.

Cap Replacement
Single-flue caps fitted years ago onto a multi-flue party-wall stack on a downtown Ardmore twin are one of the most common things we replace. When only one flue is capped, the second sits open to rain and animals, and the fasteners rust out at the mortar joint. We assess the whole stack before replacing anything.

Crown Repair
The original cast-mortar crown on a 1920s Ardmore colonial cracks through repeated freeze-thaw and lets water soak the masonry. Crown repair addresses the cracks and rebuilds the overhang so water sheds away from the flue rather than into it. We document the cracks with photos before we quote.

Crown Coating
A crown coating seals the surface and slows further deterioration from southeastern Pennsylvania’s freeze-thaw winters and humid summers. It works best on crowns that are cracked but still structurally sound, and it’s a sensible middle step when a full rebuild isn’t warranted yet.
Multi-flue caps and custom caps sized to a specific stack are also part of our chimney cap & crown work in Ardmore. Every recommendation starts with a Level 2 inspection and camera video so you can see what we see.
Trusted Brands We Service in Ardmore
We specify professional-grade materials from brands certified chimney professionals use nationwide, including Gelco, Olympia Chimney, Famco, and Copperfield. The right choice depends on your chimney’s actual condition, not a one-size-fits-all upsell. If a crown coating with Gelco is enough, we’ll say so. If your stack needs an Olympia Chimney multi-flue cap sized to a party-wall build, we’ll spec it. We don’t claim to stock parts on a truck or carry inventory locally; we source what the job requires and set expectations on turnaround when we quote. That way you’re never waiting on a part that was never going to fit your flue in the first place.
Common Chimney Cap & Crown Problems We See in Ardmore Homes
- Cracked original crowns on 1920s colonials. Repeated freeze-thaw opens hairline cracks in the original cast-mortar crown, and meltwater then soaks the masonry and spalls the clay-tile flue below. The crown looks fine from the ground until the damage is already inside.
- Half-capped party-wall stacks. A single-flue cap fitted years ago onto a multi-flue party-wall stack on a downtown twin leaves the second flue open to rain and animals. Fasteners rust out at the mortar joint, and the cap starts lifting or shifting.
- Failed flashing at the slate roof. Where an exterior masonry chimney meets a slate roof, failed flashing lets water track sideways into the shared stack. The first sign is often a ceiling stain in the adjoining twin, not at the chimney itself.
- Coal-era flues venting modern appliances. Original unlined or clay-tile flues that were built for coal and later retrofitted to oil and gas often don’t match the appliance now venting into them. A cap can’t fix a draft problem caused by a mismatched flue, and we’ll tell you that plainly.
The Shared-Stack Problem on Ardmore Twins and Row Homes
Ardmore’s downtown twins and row homes often share a party-wall chimney stack, and that changes how cap-and-crown work has to be scoped. A failed crown or bad flashing on one address routinely surfaces as a water stain in the adjoining neighbor’s ceiling, sometimes a few doors down, rather than at the chimney itself. So on many Ardmore jobs the work has to be planned with both sides of the stack in view, not just the side that’s leaking. That means coordinating with a neighbor, confirming which flue serves which address, and making sure a new cap or crown overhang doesn’t redirect water onto a shared mortar joint. It’s a two-flue decision, not a simple cap sale.
See the difference
Before
After
Before
After
Before
AfterHow a Cap and Crown Job Usually Goes on an Ardmore Chimney
On Ardmore’s 1900 – 1940 brick and stucco colonials and twins, the chimney crown is usually the original cast mortar. After decades of southeastern Pennsylvania freeze-thaw it develops hairline cracks that let meltwater into the masonry above the flue. The same water works down through the flue liner and smoke chamber, showing up as spalling clay tile or a flaking firebox. A qualified local pro starts with a Level 2 inspection and camera video of the flue, documents the crown cracks and mortar joints, and then either repairs and coats the crown or installs a properly overhanging cast crown plus a listed multi-flue cap sized to the stack. Relining or a new cap should never be recommended before the homeowner has seen the footage.
Pricing for Chimney Cap & Crown in Ardmore, PA
Typical Ardmore estimates for this work fall into a few ranges. Cap installation generally runs $250 – $550 depending on whether it’s a single or multi-flue cap and how it’s fastened. Cap replacement on an existing stack is usually $200 – $500. Crown repair runs $350 – $900, with a full cast crown rebuild at the higher end. Crown coating is typically $250 – $600. These are estimated ranges for the Ardmore market, and the written estimate you receive sets the final price. What moves the number: the number of flues, the height and pitch of the roof, whether flashing needs attention, and how much of the crown is salvageable. Estimates are free.
We Also Serve Cities Near Ardmore
We work on chimney caps and crowns in Lower Merion, Upper Darby, East Lansdowne, and Lansdowne as well as Ardmore. If you’re just outside the borough line, call and we’ll confirm coverage. The same older housing stock and freeze-thaw conditions apply across these towns, so the approach doesn’t change much from one to the next.
Serving Ardmore, PA – Our Local Coverage Area
We serve Ardmore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Ardmore
Both sides of the shared stack usually need assessment before anyone decides whose crown gets the repair. On a party-wall stack, a failed crown or flashing on one side can surface as a ceiling stain in the adjoining twin, so the work has to be scoped with both flues in view. A Level 2 inspection and camera footage of each side shows where the water is actually entering, which makes the conversation with your neighbor much easier. Call (855) 974-3360 for a free estimate – we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
You know a crown repair is needed when you can see the cracks yourself in the photos and camera footage, not when someone tells you they’re there. We document the crown cracks and mortar joints with pictures, and we show you the inside of the flue before recommending anything. If the crown is sound and only the coating has worn, we’ll say so. Call (855) 974-3360 for a free estimate.
A cap alone usually can’t fix a draft problem caused by a mismatched flue. A cap keeps rain and animals out, but if a modern furnace is vented into an unlined or clay-tile coal-era flue, the issue is flue size and lining, not the top of the chimney. Camera inspection tells you which it is before you spend money on a cap that won’t solve the problem. Call (855) 974-3360 for a free estimate.
First-degree creosote is the light, flaky soot that a regular sweep removes; third-degree is a hardened, glazed layer that needs more than a standard brushing. On older Ardmore flues with a lot of coal-era and oil-era residue, the buildup can be heavier than the homeowner expects. The camera shows the condition of the liner, and that’s what determines the sweep method. Call (855) 974-3360 for a free estimate.
An annual inspection is still worth doing even if you burn lightly, because most of the damage we see on Ardmore chimneys comes from water and masonry aging, not from heavy use. A cracked crown or failed flashing can develop whether you had ten fires or two. If the inspection shows nothing, we’ll tell you the chimney can wait and what to watch for. Call (855) 974-3360 for a free estimate.
Call Chimney Sweep Kensington for Cap and Crown Work in Ardmore
If your crown is cracking or your cap has seen better days, call (855) 974-3360 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll start with a Level 2 inspection and camera footage, show you what we find, and only recommend the work your Ardmore chimney actually needs. No reline or cap without evidence you can see.
Written by the team at Chimney Sweep Kensington.