Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Frankford?
Chimney cleaning in Frankford typically costs $150 to $350 for a standard sweep of a wood-burning flue, with most homes landing near $225. Add a camera inspection and you’re usually looking at $250 to $425. A gas-appliance flue runs less, often $110 to $200, because there’s no creosote load to break down.
Those numbers are estimates for the Frankford market in 2026. The written estimate we give you after we see the chimney sets the final price, and that estimate is free.
Chimney Cleaning Cost Breakdown (2026)
Here’s what the individual pieces of a cleaning visit cost in Frankford this year. Most jobs combine two or three of these lines, not all of them.
| Line item | Typical Frankford range (2026) |
|---|---|
| Standard sweep, wood-burning flue | $150 – $350 |
| Gas appliance flue cleaning | $110 – $200 |
| Video camera inspection | $100 – $250 |
| Second flue (two-fireplace home) | $75 – $150 additional |
| Heavy creosote removal (glazed, third-degree) | $300 – $600 |
| Bird or animal nest removal | $150 – $400 |
| Chimney cap installation | $175 – $450 |
| Crown repair or rebuild | $350 – $1,200 |
| HeatShield resurfacing | $900 – $2,200 |
| DuraFlex stainless liner installation | $1,800 – $4,500 |
| Firebox or damper repair | $300 – $900 |
The wide spread inside each line comes down to access and condition. A straight masonry flue with a clean-out door at the base sweeps quickly. A flue with an offset, a tight smoke chamber, or years of glazed creosote takes longer and uses more equipment. Two-story rooflines mean more setup than a single-story ranch, and roof pitch matters as much as height. When a chimney hasn’t been touched in a long while, the cleaning and the inspection often uncover work that’s cheaper to handle now than after water gets in.
What Affects Chimney Cleaning Pricing in Frankford
Frankford’s housing stock does a lot to shape these prices. The neighborhood’s rowhouses and older detached homes were built around fireplaces that were the main heat source, and many of those flues have been burning wood for a long time. That history shows up in the cost.
- How much creosote has built up. Light, sooty deposits brush out in a normal sweep. Glazed, tar-like creosote is a different job. It bonds to the flue walls and has to be broken down with rotary equipment, which pushes a job from the standard range into the $300 to $600 territory.
- Flue condition and liner type. Clay tile liners in older Frankford homes are often cracked or spalling. If the camera inspection shows gaps, sweeping alone won’t fix it, and the conversation moves to relining. We carry both chimney liner installation systems, HeatShield for resurfacing and DuraFlex stainless for full relining, so you get an option that matches the flue’s actual condition rather than a single default answer.
- Whether the chimney is heated by a wood stove or open fireplace. Wood stove flues run hotter and load creosote differently than an open hearth. They also tend to need more frequent sweeping, which affects how often you’re paying.
- Access to the roof and the clean-out. A clean-out door that’s been painted shut, blocked by shelving, or hidden behind finished basement walls adds time. So does a steep roof or a flue that needs a ladder setup above a porch.
- Whether the cap and crown are intact. A missing or damaged cap lets rain and animals straight into the flue. Nest material has to come out before any sweeping can happen. Crown cracks let water into the masonry itself, and that’s when a $350 crown repair turns into a much larger rebuild if it’s left alone.
- The season you book. Late summer and early fall is when most Frankford homeowners think about the fireplace, and schedules fill. Spring and early summer are quieter, and getting the sweep done then means you’re not waiting when the first cold snap hits.
Why the Cleaning Price Changes Once We’re on the Roof
The estimate you get on the phone is based on what you can tell us about your chimney. The price you pay is based on what we actually find. Those usually match, but not always, and it’s worth knowing why.
A chimney that looks fine from the ground can have a cracked crown, a loose cap, or a flue full of nest debris. None of that is visible from the driveway. Our technicians have up to 9 years of experience and carry cameras for exactly this reason: we’d rather show you the inside of your flue on a screen than tell you what we think is in there. If the job turns out to need more than a sweep, you’ll hear the price before we touch anything. You won’t get a surprise number at the end.
We work the full system, top of the cap to the firebox floor. That means when a cleaning turns up a liner problem, a crown issue, or a damper that won’t seat, the same visit can address it instead of handing you off to a second contractor. chimney sweep kensington handles sweeping, cap and crown, liners, rebuilds, and fireplace repair as one scope of work.
What a Chimney Cleaning Includes
A proper sweep is more than running a brush down the flue. Here’s what the visit covers when it’s done the way it should be.
- The firebox is cleared and the damper checked for proper operation.
- The smoke chamber and smoke shelf are brushed, since that’s where creosote collects out of easy reach.
- The flue is swept with the right tool for the liner type, with drop cloths and a running vacuum to keep soot out of your living room.
- The firebox floor, damper, and surrounding masonry are inspected for cracks and gaps.
- The cap, crown, and flashing are checked from the roof.
- You get a plain explanation of what’s fine and what needs attention, with pricing for anything that isn’t routine.
Gas fireplaces don’t produce creosote, but they still need attention. The flue can collect dust, debris, and animal nests, and the venting has to be confirmed clear before the season starts. That’s why the gas cleaning line runs lower but isn’t zero.
How Often Should You Have the Chimney Cleaned in Frankford?
Once a year is the standard for a wood-burning fireplace that sees regular use. If you burn often, or you’re burning green or unseasoned wood, twice a year is worth considering. Gas appliances can usually go a year between cleanings unless you notice a draft problem or a smell.
Frankford’s humid summers are the part people underestimate. The chimney sits idle for months, and any moisture that gets past a cracked crown, a missing cap, or failing flashing stays in the masonry and works on it through the warm season. That’s why we check the exterior as carefully as the flue. Water intrusion is the leading cause of chimney deterioration, and it’s far cheaper to keep out than to repair. If your cap is missing or your crown has visible cracks, that’s the first thing to fix, before anything cosmetic.
How to Save on Chimney Cleaning
The biggest savings come from catching problems early. A $200 sweep today can head off a $2,000 liner job down the road. A few practical ways to keep the number down:
- Book the sweep off-season. Spring and early summer scheduling tends to be easier, and you won’t be competing with the pre-winter rush.
- Bundle inspection with the cleaning. Paying for the camera inspection alongside a sweep usually costs less than booking them separately.
- Fix the cap before the flue fills up. Cap installation runs $175 to $450. Nest removal and the sweeping that follows runs more than that, and it happens again the next year if the cap stays open.
- Use dry, seasoned wood. Wet wood creates more creosote, and more creosote means more frequent sweeping. That’s a simple change with a real effect on your annual chimney spend.
- Get the estimate in writing first. Every job we quote comes with a free written estimate, so you know the price before the equipment comes out. Call (855) 974-3360 to set one up.
Cheap isn’t the goal with a chimney. A sweep that leaves stubborn creosote in place, or skips the inspection and misses a cracked liner, costs you more later. The right material for your flue’s condition is what keeps the total down over time, and that’s the approach we take.
Chimney Cap and Crown: The Cheap Fix That Saves the Expensive One
Of everything we look at during a cleaning, the cap and crown are where Frankford homeowners save the most money by acting early. A missing cap is an open door for rain, squirrels, birds, and leaves. A cracked crown lets water into the top of the masonry, where it freezes, expands, and opens the joints up. Repairing a crown runs $350 to $1,200. A full rebuild because the top of the chimney has deteriorated runs far higher.
We install and repair chimney caps and crowns as part of the same service, so if the cleaning turns up a problem up top, it gets handled before the flue has a chance to fail. Built to last, not patched to pass inspection, is the standard we hold to on these repairs. A cap that’s going to blow off next winter isn’t a fix.
Can You Fix It the Same Day?
Often, yes. Routine sweeping and minor repairs are typically handled on the same visit. If your job needs a liner install or a crown rebuild, we’ll schedule it properly and tell you exactly what it involves. We’d rather do it once and do it right than rush a structural repair.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 974-3360 and we’ll book you in. A call outside dispatch hours is booked into the next opening.
Chimney Liner and Rebuild Costs in Frankford
When the cleaning reveals a flue that can’t safely vent, the next step is either resurfacing or relining. Both are on our roster, which means you get an honest recommendation based on the flue’s condition rather than whatever the nearest contractor happens to sell.
HeatShield resurfacing runs $900 to $2,200 and works when the existing clay liner is sound enough to be restored. DuraFlex stainless liner installation runs $1,800 to $4,500 and is the choice when the liner is cracked, spalling, or missing. Both systems are specified by certified chimney professionals because they hold up to the heat and the flue gases. If your home has an unlined flue from a much older build, that’s a safety issue that needs fixing before the fireplace is used again. We confirm what’s required for your chimney based on its type, venting needs, and the code that applies to it. Most cities require a permit for structural chimney work, so ask your city’s building department what applies before that job starts.
Firebox and damper repairs fall in the $300 to $900 range and are often handled on the same visit as the sweep. A damper that won’t close properly wastes heat all winter and lets conditioned air escape up the flue in summer.
Why Homeowners Choose Us for the Work
We’re a full-system chimney specialist, not a sweep-only service. That covers chimney repair, chimney cap installation, chimney crown repair, chimney rebuild services, and fireplace repair alongside the regular cleaning. The brands we install are the ones the trade specifies: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. We specify professional-grade materials because your chimney vents fire. It’s the right logic for safety and the right logic for a repair you won’t have to redo.
If you own a gas fireplace, our gas fireplace service covers the venting and appliance side. If you’re in a nearby neighborhood, see our chimney sweep in Frankford page. And if you’re working out the whole picture for the year, our chimney inspection page explains what the camera check covers and when it’s warranted.
FAQs – Chimney Cleaning Cost
How much does a chimney sweep cost in Frankford?
A standard sweep in Frankford typically runs $150 to $350 in 2026, with most jobs landing near $225. A gas flue costs $110 to $200. Heavy creosote or nest removal pushes the price higher. Call (855) 974-3360 for a free written estimate.
Is it cheaper to repair or replace my chimney liner?
Repair is nearly always cheaper when the liner can be restored. HeatShield resurfacing runs $900 to $2,200 versus $1,800 to $4,500 for a full DuraFlex reline. If the clay tiles are cracked or spalling, resurfacing won’t hold and relining is the correct fix. Our free estimate tells you which applies to your flue.
How much does creosote removal cost in Frankford?
Heavy glazed creosote removal typically runs $300 to $600. Standard sooty build-up is handled within the normal sweep price of $150 to $350. Glazed creosote is a fire risk, so it shouldn’t wait. Call (855) 974-3360 to get it assessed.
Can I get an exact price before you come out?
We give you a range on the phone and a written estimate on site, free of charge. The written estimate sets the final price, so there’s no surprise at the end. Call (855) 974-3360 to schedule yours.
Do you charge extra for urgent or same-day cleaning?
No. The price is set per job by the written estimate, not by when you call. Same-day work is often available. Call (855) 974-3360. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Frankford market as of 2026. Chimney Sweep Kensington offers free estimates – call (855) 974-3360.
Written by the team at Chimney Sweep Kensington.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Bryce Thompson"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Mark Gallagher"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Tim Pruitt