Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Frankford
If your chimney is leaking, smoking, or shedding mortar onto the sidewalk, we can help. Chimney Sweep Kensington handles chimney repair in Frankford from the crown down to the firebox floor: repointing, brick replacement, waterproofing, flashing, relining, and full rebuilds. We know these blocks. Frankford’s two- and three-story brick rowhouses were mostly built between 1900 and 1930, and their chimneys have been through a century of Philadelphia freeze-thaw winters. We answer 24/7 at (855) 974-3360, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Why Frankford Homeowners Call Chimney Sweep Kensington for Chimney Repair
Frankford has no shortage of sweep-only outfits. What it lacks is someone who can sweep the flue, then turn around and rebuild the crown, replace cracked clay tiles, and repoint the stack when the job calls for it. That’s the gap we fill. We handle every layer of the chimney system under one company, so you’re not handed off to a mason who never saw the inside of the flue. Our technicians have up to 9 years of experience, and every job starts with camera inspection and a photo report you can see for yourself.
That matters in a neighborhood like Frankford, where rowhouse chimneys share walls, share stacks, and sometimes share flues. When we tell a homeowner their neighbor’s appliance is venting into their side of a shared chimney, we can show them the crack or the unlined section on camera. No guesswork, no pressure. The local pro we connect you with is licensed and insured as their state requires, and the flat-price sweep is agreed before booking, so there are no surprises when the work is done.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Frankford
We focus on the repairs Frankford’s older rowhouses actually need, and we specify professional-grade materials because your chimney vents fire. Every repair here is priced per job by a written estimate after we’ve inspected the flue.
Mortar Repointing
Original coal-era mortar in Frankford rowhouses goes soft and sandy after decades of freeze-thaw cycling, and once the joints erode the brick starts to move. We cut out the failed mortar and repoint with a mix matched to the original brick, not a hard modern mortar that traps moisture. Repointing a typical Frankford stack runs roughly $900 to $2,200 depending on height and how much of the chimney is accessible.

Spalling Brick Repair
Spalling is the flaking and popping you see on the faces of old brick, and Philadelphia’s humid summers followed by hard freezes push it along faster than in milder climates. We replace spalled units with brick matched to the surrounding stock and address the moisture source behind the damage. Spot brick repair in Frankford typically runs $400 to $1,100.

Chimney Waterproofing
Water intrusion is the leading cause of chimney deterioration, and on a Frankford rowhouse the usual entry points are a failed crown and porous brick. We repair the crown, then apply a breathable waterproofing that keeps rain out without trapping vapor inside the masonry. Waterproofing a single stack in Frankford usually runs $350 to $800.

Flashing Repair
Flashing is the metal where the chimney meets the roof, and on attached Frankford homes that seam is often shared with the neighbor’s roof plane. Failed flashing shows up as water stains on the chimney breast inside the house, and it needs to be reset or replaced before the framing rots. Flashing repair in Frankford runs about $300 to $750. See the full scope of what our chimney repair team covers.
Trusted Brands We Service in Frankford
The liner and resurfacing materials we install are the same ones certified chimney professionals specify nationwide. We work with DuraFlex and HeatShield for relining and resurfacing, Olympia Chimney for caps and components, and Famco and Copperfield for venting and termination parts. That gives us options based on what your flue actually looks like inside, rather than one product pushed on every chimney. We don’t stock parts in Frankford; we specify the right system for your chimney’s condition, order it, and schedule the install. If a brand you already own needs service, tell us what’s on the cap or the liner and we’ll confirm what’s needed before we book the job.
Common Chimney Repair Problems We See in Frankford Homes
Frankford’s chimney problems are shaped by the neighborhood itself. Dense rowhouse blocks, tightly spaced chimney tops, and a century of fuel switching from coal to gas and wood leave a specific set of failures.
- Cracked or missing clay tile liners in shared stacks. When tiles break in an attached rowhouse, flue gases can migrate into a neighbor’s side of the chimney through the gap. That’s the source of the smoke smell in an upstairs room that has nothing to do with your own fire.
- Spalling brick and eroded mortar from freeze-thaw cycling. Philadelphia winters drive water into the brick face, and each freeze pushes it outward. Original coal-era chimneys on these blocks show it first at the crown and the top few courses.
- Failed crowns and flashing letting water in. A cracked crown sends rain down the flue, which rusts dampers and breaks down firebox parging. On Frankford’s attached homes, roof-level flashing failures are just as common and just as damaging.
- Debris and nesting material pulled from neighboring flues. In tight Frankford blocks the chimney tops sit close together, so a cap that’s missing or damaged on one stack lets birds and squirrels move debris into adjacent flues. Technicians working these roofs also navigate narrow alleys and steep pitches, so access is part of the plan.
See the difference
Before
After
Before
After
Before
AfterHow Shared Flues on Frankford Rowhouses Cause Cross-Contamination
Frankford’s rowhouse stock is dominated by early-20th-century brick homes with original internal chimneys built for coal and converted later to gas, oil, or wood. Because those stacks were frequently shared or back-to-back, a flue serving one address can draw smoke, debris, or nesting material from a neighbor’s appliance through a cracked clay tile or an unlined section. That’s the local reality a generic chimney repair page never addresses. A sweep alone won’t catch it. You need someone who will scope the flue, check the firebox and smoke chamber for third-degree creosote glaze, then decide whether repointing, a crown rebuild, or relining with a HeatShield or DuraFlex system is actually the fix.
Here’s how a typical repair call in Frankford usually goes. It often starts with a neighbor’s smoke smell in an upstairs room or crumbled mortar on a shared chimney breast rather than an obvious fire. The technician scopes the flue, inspects the firebox and smoke chamber, checks the crown and flashing, and photographs everything so the homeowner can see the deterioration for themselves. From there the written estimate spells out what’s structural and what can safely wait. Nothing is recommended without camera evidence.
Pricing for Chimney Repair in Frankford, PA
Repair pricing in Frankford reflects the housing stock: older rowhouse chimneys almost always need more than a quick patch. Standard sweeps and inspections typically run $150 to $300. Mortar repointing on a typical stack runs $900 to $2,200. Spalling brick repair runs $400 to $1,100. Chimney waterproofing runs $350 to $800, and flashing repair runs $300 to $750. Full chimney rebuilding, when the stack is too far gone for spot repair, runs roughly $3,000 to $8,000 depending on height, liner condition, and access. Those ranges are typical estimates; the written estimate sets the final price, and every estimate is free after inspection. Call (855) 974-3360 and we’ll book the visit.
We Also Serve Cities Near Frankford
Our service area reaches beyond Frankford into the surrounding neighborhoods. We work in Olney, Kensington, Port Richmond, and Hunting Park, and the same shared-stack problems show up in rowhouse blocks across those areas. If you’re on a border block, tell us which side of the street you’re on so we can confirm coverage. We serve Frankford and the surrounding neighborhoods with the same inspection-first approach.
Serving Frankford, PA – Our Local Coverage Area
We serve Frankford and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Frankford
Yes, in most cases the cause is a cracked clay tile or unlined section in a shared flue that lets flue gases cross into your side of the stack. A Level 2 inspection with a camera confirms exactly where the breach is, and relining that flue with a HeatShield or DuraFlex system typically stops the migration. Call (855) 974-3360 to book an inspection. Estimates are free.
Repointing is the right call when the brick faces are still sound and only the mortar joints have eroded. A rebuild is necessary when the brick itself is spalling, the crown is failing structurally, or the top courses have shifted. We photograph the stack and show you the difference before recommending either. Call (855) 974-3360 for a free estimate.
No. Third-degree creosote is a glazed, hardened deposit that fuses to the flue wall and cannot be removed with a standard sweep. It’s a fire hazard and typically calls for chemical treatment or relining rather than brushing. A camera inspection tells us which path is safe. Call (855) 974-3360 to schedule one.
Yes, water stains on or near the chimney breast almost always point to failed flashing at the roof seam, sometimes paired with a cracked crown. Ignoring it lets rot spread into the framing and rust the damper. Flashing repair in Frankford typically runs $300 to $750. Call (855) 974-3360 for a free estimate.
A Level 2 inspection includes a video scope of the flue from top to bottom, a look at the firebox, smoke chamber, damper, crown, and flashing, and a photo report you can review yourself. On attached rowhouses we also check the shared stack for cross-contamination between flues. The inspection takes about an hour and gives you a written assessment. Call (855) 974-3360 to book.
If your Frankford chimney is smoking, leaking, or shedding mortar, don’t wait for the next freeze to find out how bad it is. Call (855) 974-3360. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, the flat price is agreed before booking, and nothing is recommended without camera evidence you can see for yourself.
Written by the team at Chimney Sweep Kensington.